Fj80oregon
GOLD Star
- Vehicle Model
- 80 Series
- Location
- Forest Grove, Oregon 97116 United States
This posting is for a long block only. so valve cover to oil pans no accessories. The block has been hot tanked then machined for flatness. Bored .50 over OEM pistons and rings will be installed. New OEM bearings on the rods and crank. The head has been cleaned and checked for cracks. Three way valve grind and OEM valve guide seals installed. Head has been machined for flatness. Head is assembled and valves adjusted by machinist. New timing chain, tensioner, sprockets, and slipper/dampner. will paint the block then install OEM head gasket with ARP head studs. New oil cooler cover and used oil cooler installed. Oil pans installed with new front and rear main seal. All parts are OEM nothing aftermarket at all. Shipping is available Last one I shipped to San Diego area from Oregon was $700 each way. I ship them on a standard pallet so you would need a way to unload it. I would require a core deposit as I want your old motor if it’s available. So I can keep rebuilding these and putting them out for the MUD community. Pm me or ask questions here for full transparency. This is the 7th motor I have done and have two more on the stands now. I drive my first rebuild and have sold 2 trucks and 4 long block with rebuilds by Me. Hopefully I can turn this eventually into a part time gig.
Motors are $7500 with a $1000 refundable core. Pictures are from the tear down And will post pictures of assembly hopefully this weekend. Thanks Wes
Motors are $7500 with a $1000 refundable core. Pictures are from the tear down And will post pictures of assembly hopefully this weekend. Thanks Wes