80 Series 3D Printed Parts (1 Viewer)

[Outsane]

@landtank

I am using the glowshift dual gauge right now for transmission temps (seems to be a non issue). I can make it fit that.

 

[landtank]

Excellent

 

[xetura]

Does anyone have a list of filament A from brand XYZ matches certain interior colors?

This would be nice to have. I'd rather not buy a bunch of random colors guessing.

 

[roflbox]

@OGBeno

Would you happen to have some info on the subject of how Toyota made their interior colors?
Are they Pantone colors? Or any other insight you might want to share?

 

[roflbox]

This would be nice to have. I'd rather not buy a bunch of random colors guessing.

I am currently looking around for manufacturers that have samples, I ordered these from Atomic Filaments:

Sample Coil PETG - Khaki

KHAKI PETG PRO Check out our vast collection of 1.75mm filament sample coils. They are a great low cost opportunity to checkout new products or feed your 3D Pen / Printer. Sample coils are 50 grams and come bagged with a desiccant packet to ensure dryness. PETG is a newer printing filament and...

atomicfilament.com

Sample Coil PETG - Majestic Brown

Majestic Brown PETG PRO This highly sought after color is HERE! Feel the magic with our new majestic brown! Check out our vast collection of 1.75mm filament sample coils. They are a great low cost opportunity to checkout new products or feed your 3D Pen / Printer. Sample coils are 50 grams...

atomicfilament.com

 

[roflbox]

havent printed up any swatches yet, but just holding the filaments to the part no dice with the brown, its quite "chocolatey".

The khaki looks kinda close to some interior parts, will print up some swatches and take some photos once I switch the printer over to PETG

 

[Outsane]

I use colors from Paramount3d

 

[roflbox]

I use colors from Paramount3d

would you happen to use their primordial earth color? that was a secondary conclusion I just reached over here:

Builds - The Green Bastard

quite the experience today: Big issues: Something that had been sitting in the back of my mind did infact come true: There is some angular distortion from my phone's camera (iphone 12) All of the cut out locations drift radially outward from the center focus of the photo. To potentially...

forum.ih8mud.com

my best guess for a pantone code is 7596

 

[OutlawMike]

Did this one a while back, never posted about it. It is a platform that screws into the dome light locations so I could put in a flat LED grid. The grid has a torpedo bulb adapter.

 

[Arizona Wilderness]

Great thread. I cadded up a few parts for my BMW, but none for the Landcruiser so far.

This is probably a stretch, as I don't even know what's wrong, but the driver's side door handle broke off a few years ago, and I replaced it with a non-OEM one, and it looks great(!) but doesn't actually open the door so I have to leave the window down.

If anyone can tell me why, maybe I can cad it up myself lol.

 

[tmxmotorsports]

Manual transmission console??????

 

[Outsane]

would you happen to use their primordial earth color?

Yup

 

[Enigma]

Recently bought a coil spacer from Ironman and thought damn, i could have just printed that...

Still need to install them, but I can't see why it wouldn't work.

30mm Coil Spacer by Xizervexius MakerWorld: Download Free 3D Models

This is a 30mm front coil spacer for an 80 series Toyota Land Cruiser. The model was measured from an IronMan LCF30 polyurethane spacer I had purchased. I still need to find time to install it, so can't yet vouch for how well it works, but I can't see why it wouldn't.I do not know if it would...

makerworld.com

15mm Coil Spacer by Xizervexius MakerWorld: Download Free 3D Models

This is a 15mm front coil spacer for an 80 series Toyota Land Cruiser. The model was measured from an IronMan LCF30 polyurethane spacer I had purchased. I still need to find time to install it, so can't yet vouch for how well it works, but I can't see why it wouldn't.I do not know if it would...

makerworld.com

 

[Outsane]

Recently bought a coil spacer from Ironman and thought damn, i could have just printed that...

Still need to install them, but I can't see why it wouldn't work.

View attachment 3708955

30mm Coil Spacer by Xizervexius MakerWorld: Download Free 3D Models

This is a 30mm front coil spacer for an 80 series Toyota Land Cruiser. The model was measured from an IronMan LCF30 polyurethane spacer I had purchased. I still need to find time to install it, so can't yet vouch for how well it works, but I can't see why it wouldn't.I do not know if it would...

makerworld.com

15mm Coil Spacer by Xizervexius MakerWorld: Download Free 3D Models

This is a 15mm front coil spacer for an 80 series Toyota Land Cruiser. The model was measured from an IronMan LCF30 polyurethane spacer I had purchased. I still need to find time to install it, so can't yet vouch for how well it works, but I can't see why it wouldn't.I do not know if it would...

makerworld.com

Rad I have been on the verge of doing this also

 

[Marvelicious]

If these turn out to be durable enough, it would actually be pretty nice for those setups where the new springs don't ride QUITE level. My 3D printing skills are pretty rusty, but I would imagine it would be super easy to make them available in custom heights (10mm minimum maybe?) so the super OCD guys can tune to their heart's content. Then you could sell them another set in a year once the springs settle a bit.

 

[Outsane]

If these turn out to be durable enough, it would actually be pretty nice for those setups where the new springs don't ride QUITE level. My 3D printing skills are pretty rusty, but I would imagine it would be super easy to make them available in custom heights (10mm minimum maybe?) so the super OCD guys can tune to their heart's content. Then you could sell them another set in a year once the springs settle a bit.

Custom heights was the plan, even colors maybe

 

[highsierra4x4]

So I ordered these this week and was wondering if some one wanted to make one for the front to replace that dome light slash sun roof controls. Make like a hole price that will screw in there with 2 kc cyclones and 2 switches

 

[Outsane]

That's a lot of light!
I replace that bulb with a lights that goes from red to white..

 

[highsierra4x4]

I have always used the kc cyclones I think they are the best I want 2 for the front so I can have a white and a red. Some 3d printed molding would look good compared to bolts lol

 

[Outsane]

Looks good