It can't be completely assembled, the fenders are in boxes on my dock.
I gotta get them launched ASAP.
I gotta get them launched ASAP.
Builds 3 days and 3300 miles later (2 Viewers)
- Thread starter buckroseau
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
buckroseau
May I have another!!!
- Thread starter
- #322
mmmmmmm................O.....E....M......fenders.........
You need to send those.....I might need them next week
Not quite driving it.....yet Hopefully the updates will start up again tomorrow. I was in Philedelphia, PA all last week and got home Monday morning around 1:00 a.m. I have to work next weekend again, but hoping to get out of work tomorrow early and get a little time in. It's not going to be anything special, probably just welding in some misc. brackets on the frame and straigtening some brackets....also a dozen or so busted off bolts have to be drilled out and re-tapped.
Hopefully if that gets done I can start sandblasting or have someone else start blasting this week. Then it's paint, paint, paint....and assemble, assemble, assemble........
Thanks, Matt
You need to send those.....I might need them next week
Not quite driving it.....yet
Hopefully the updates will start up again tomorrow. I was in Philedelphia, PA all last week and got home Monday morning around 1:00 a.m. I have to work next weekend again, but hoping to get out of work tomorrow early and get a little time in. It's not going to be anything special, probably just welding in some misc. brackets on the frame and straigtening some brackets....also a dozen or so busted off bolts have to be drilled out and re-tapped.Hopefully if that gets done I can start sandblasting or have someone else start blasting this week. Then it's paint, paint, paint....and assemble, assemble, assemble........
Thanks, Matt
Matt, You are the man!!
buckroseau
May I have another!!!
- Thread starter
- #324
Got about 5 hours on the lpb this afternoon. Not anything major, but pretty much wrapped up what I needed to do on the frame.Blasted and primed the bracket that gets welded to the drivers side frame horn. Had to bolt up the center arm to make sure everything lined up. Once I had it where I wanted it, removed the center arm and welded it in.
Made the bracket for the passenger side. Not a big deal, but wanted it like factory. Pics pretty much say it all.
Cut out he key hole in the rear for the spare tire carrier crank. Used a 7/8" hole saw in the center and then the die grinder into the edges. Once I was close I used a hand file to get the corners square.
Torched the spring pins off the rear springs......just a bit of rust in between the springs. Drilled out several busted off bolts and re-tapped....few other misc. things to trivial to mention.
Around 7 pm as i was runnning out of stuff to do, a friend of mine called me. He was heading over to a guys place who does sand blasting in the evening, asked me if I had anything ready for blasting........Within 20 minutes the frame, rims and leaf springs were all loaded on the trailer. Got over to his place around 8, hauled everything in and figures he might have it all done later tomorrow night.....that would be great if he did! I guess I'll have to wait and see, but who knows, might be shooting some paint on a frame in a few days
Matt
Last edited:
buckroseau
May I have another!!!
- Thread starter
- #325
more
buckroseau
May I have another!!!
- Thread starter
- #326
last 1
Last edited:
2ndGenToyotaFan
Moderator
- Joined
- Jan 8, 2006
- Threads
- 264
- Messages
- 9,806
- Location
- Ashland, OR
- Website
- www.jeffersonstatecruisers.com
Hey! What happened to the rest of your vin......
I just went out and looked at my SWB today and then looked at this thread, the old tortus and hare theory somehow does not apply when Matt is involved.
I don't think this project is going to get me through the cold winter as the LV did he will get it done way to early.
Good Going Matt.
I don't think this project is going to get me through the cold winter as the LV did he will get it done way to early.
Good Going Matt.
buckroseau
May I have another!!!
- Thread starter
- #329
Well...it ain't done yet
But it is going pretty good. I keep asking myself if I am sacrificing any quality for speed? I don't think I am at all, I just could do it any better, or worse for that matter?? I just keep working on it and eventually it will be done I guess.......and I don't want to get done to soon, having way to much fun Dropped the frame and a lot of other parts off at that sandblast place last night. The plan was to run over there tonight and give him a hand rotating it and get it done and loaded up....I was hoping to have it back in my booth tonight. But....he called me up this afternoon and was sick with the flu or something. Going to try again tomorrow night, hopefully that works out.
Gotta work all weekend, but hoping to get that frame back in the booth and maybe shoot some primer and paint in the evenings this week..........still hoping.
Matt
buckroseau
May I have another!!!
- Thread starter
- #330
Got about 3 hours in on the lpb tonight.......wish I could post some pics 
But, I'm currently waiting to get my silver star back. Payed via paypal 2 days prior to it expiring, but I it was with some e-check bullsh-t???? Not even sure how I did that, but takes 3 to 4 days to clear....so I can tell you what I did, but it will be a couple days before the pics show up....sorry??
Picked up the frame, rims, leaf springs and other misc. parts Friday night from the sandblaster. I had to work late Friday night, so by the time I got home it was really late and couldn't do anything anyway. Had to work all day today, but got home and got started on the frame.
Neighbor came over and helped me hang up the frame in the booth. Took some time and blew everything out and tacked clothed it down. Mixed up a half gallon of DP90LF and sprayed a couple coats. Worked inside the frame first and hosed it on hard, had the stuff running all over the inside of the frame....should last a while now. After I got the inside of the frame sauced up with DP I sprayed the outside. 2 nice coats...I think it turned out great (wish I had pics to show you).
Going to let it dry over night, but plan on spraying a couple coats of single stage ureathane tomorrow night. So, it should be high gloss black tomorrow and ready to take down Monday night.
PS. if anyone with a silver star wants me to email them 3 pics this evening, please let me know and you can post them up on this thread. At least you can see what I did? And I'll post more tomorrow or the next day when I get my start back. Have to post your email address on this thread...my PM box is full also
Thanks, Matt
But, I'm currently waiting to get my silver star back. Payed via paypal 2 days prior to it expiring, but I it was with some e-check bullsh-t???? Not even sure how I did that, but takes 3 to 4 days to clear....so I can tell you what I did, but it will be a couple days before the pics show up....sorry??Picked up the frame, rims, leaf springs and other misc. parts Friday night from the sandblaster. I had to work late Friday night, so by the time I got home it was really late and couldn't do anything anyway. Had to work all day today, but got home and got started on the frame.
Neighbor came over and helped me hang up the frame in the booth. Took some time and blew everything out and tacked clothed it down. Mixed up a half gallon of DP90LF and sprayed a couple coats. Worked inside the frame first and hosed it on hard, had the stuff running all over the inside of the frame....should last a while now. After I got the inside of the frame sauced up with DP I sprayed the outside. 2 nice coats...I think it turned out great (wish I had pics to show you).
Going to let it dry over night, but plan on spraying a couple coats of single stage ureathane tomorrow night. So, it should be high gloss black tomorrow and ready to take down Monday night.
PS. if anyone with a silver star wants me to email them 3 pics this evening, please let me know and you can post them up on this thread. At least you can see what I did? And I'll post more tomorrow or the next day when I get my start back. Have to post your email address on this thread...my PM box is full also
Thanks, Matt
yer PM box is full.
Well...it ain't done yet
Dropped the frame and a lot of other parts off at that sandblast place last night. The plan was to run over there tonight and give him a hand rotating it and get it done and loaded up....I was hoping to have it back in my booth tonight. But....he called me up this afternoon and was sick with the flu or something. Going to try again tomorrow night, hopefully that works out.
Gotta work all weekend, but hoping to get that frame back in the booth and maybe shoot some primer and paint in the evenings this week..........still hoping.
Matt
Half the time I show some one my own work I have be very carefull not to show them everything I did not do up to my expecations and forget to show the work I am happy with.
We will be waiting for the Lost in Etrade Silver star for more pics to enhance my future tripping on my own projects.
Myrle
buckroseau
May I have another!!!
- Thread starter
- #333
Not anymore
I think woody might be getting paid twice, but that's ok....got my star back..Pics coming here shortly
buckroseau
May I have another!!!
- Thread starter
- #334
Pics of the frame hung up in the both, freshly sandblasted and then a couple coats of DP90LF epoxy primer.
Matt
Matt
buckroseau
May I have another!!!
- Thread starter
- #335
more
buckroseau
May I have another!!!
- Thread starter
- #336
more 2
buckroseau
May I have another!!!
- Thread starter
- #337
more 3
buckroseau
May I have another!!!
- Thread starter
- #338
last 3
That is a gorgeous site!
buckroseau
May I have another!!!
- Thread starter
- #340
