Media 200 series picture thread (34 Viewers)

Photo/Video/Audio threads

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Installed the coated bumper, winch and tough dog suspension system from trail tailor! I don't have many miles on the suspension yet but am very pleased with the ride so far. I have an appointment for alignment tomorrow morning.
IMG_1997.JPG
IMG_1998.JPG
IMG_1999.JPG
IMG_2001.JPG
 
Prerunner on the whoops!

Huge difference over stock travel, I remember getting allot of buck on the same section last year.

If you focus you can tell all 15 inches of travel upfront is being used. Good thing I had the rebound cranked all the way. Keeps it flat. Softest compression though.





Also threw in a zero to sixty on low range since I was curious to see how it runs, 35s accelerate considerably quicker. The tight ratio of the low range makes it seem like a sequential rally transmission. Unfortunately cant use it to much since it overheats way to fast.
 
How do you like your new method wheels? Any issue with fitment?
No issue at all, love them so far. Only concern is that the offset of the wheel makes sit on the edge of the fender meaning if I ever plan to run 285s bottoming out would be an issue. Although factory bump stops should keep it out of that zone.
 
164096EE-29F5-40AE-9A90-81292ABDEA5C.jpeg
2CCBD4DE-4F57-4452-9F15-F10995042B35.jpeg
Wrapping up on the wheels...... seeing it up on the jack like this and it’s height get me goin’..... might need to accelerate the budget for the lift ;)
 
Looks good! Are these visible bolts structural? Is the bumper modular and bolted together here are the center sections? Is there an option to skip the bolts and have a “smooth” look?

View attachment 1860826
Those are structural. The bumper is modular, those are steel recovery caps that tie everything together while giving an extremely strong recovery Point on an aluminum bumper.
 
Went to the mall and happened to park beside two other 200s. Of course I had to take a photo :D

IMG_3985.JPG
 
Headed to the deer lease with my brother and Dad, who owns the 200.

IMG_0524.jpeg
 
What is your wheel tire combo spec for this rig?
I roll the Fuel Anza 18x9 with a 20mm offset, tires are 285/70 R18 in the BFG KM2 flavor...
 

Users who are viewing this thread

Back
Top Bottom