Won’t be able to get it mounted until tomorrow but already looking good from powder.
200 Series and Tundra wheels on 100 series photo thread (2 Viewers)
- Thread starter krice118
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Won’t be able to get it mounted until tomorrow but already looking good from powder.
Last edited:
Safe to assume you're running 1.25 spacers? Looking a set of the same wheels but with LT-275/70/18 tires.
Installed Tundra 18" wheels that came with 265/70/18 and removed the running boards
Yes. I went with spacers for now. Planning a looooong cross country trip next year and I might go back to no spacers to reduce the variables.
Love the nitto ridge grappler
I just picked up a set of 20" wheels off a 2018 Tundra Sport and I'm running into the same issue. How did you flatten the dust cpas and how much can you grind out of the inside of the cap? These seem way too flat to go fit on the front of my 1999 LC.
I clearanced my dust cap about 1/8”, and popped the logo cap off of the center cap of the wheel and used a 1-1/8” spade bit to clearance the center cap approximately 1/8” more. Just go easy and remove some material, test fit, etc, until you get the room you are looking for.
Finally installed some spidertrax spacers which allowed me to run front caps.
Would you mind sharing what size tire you’re running? Thanks!
275/70/18
Really? That’s the same size tire I’m running + same rims. Yours looks hot
and I need to get spacers like yesterday 
Yep, spacers really help fill out the wheel well and makes the stance look more aggressive.Really? That’s the same size tire I’m running + same rims. Yours looks hot
hey @unleashd , this is such a great looking wheel setup! did the front caps not fit on? and if not, could the center be dremeled out to get them to fit? I thought I remembered seeing someone say that once, but I found a set of these locally for a good price and am considering this setup - thanks!
Installed Tundra 18" wheels that came with 265/70/18 and removed the running boards
Last edited:
Hey @dubitup , this is still the best looking wheel setup I've seen on a 100 series ! I have a black 07' and have been keeping my eye out for a set locally for a while, and just finally found them! how did you get the front cap to fit? did you have to cut the center part out or something? thanks!
This is badass! Questions - what are the lights on your gobi rack? I've been trying to find some slim enough to fit in that spot too. thanks!
2021 Tundra Trail Edition wheels which have a graphite finish
Bora 1.25" spacers
Bora 1.25" spacers
Last edited:
The front dust caps can be made to fit in a few different methods
1. Zero creativity, which I adopted - Use spacers
2. Creative method 1 - Use a hammer and carefully flatten the dust caps
3. Creative method 2 - Use a dremel or hole saw to cut a hole in the dust cap to fit the center caps
4. Creative method 3 - Design your own and 3D print the center cover, slap a Lexus logo on it
275 70 18 Toyo AT III on Tundra rims and 1.25 spacers
