200 Series and Tundra wheels on 100 series photo thread (1 Viewer)

[Idaho Savage]

Here's the listing.

69512 Refinished Toyota Tundra 2007-2013 18 inch Black Steel Wheel, Rim | eBay

 

[Wesley Crusher]

I don't know. To be clear, I ordered repainted Tundra steel wheels via Ebay. They're 18" X 8 and I run SpiderTrax spacers in the front. I think there's some difference in offset as discussed in this thread. They are significantly heavier.

Thanks. I recall reading some comments about the wheels being a direct fit so I assumed no spacers were needed. I guess I'll have to do a bit more research.

Also, given that the wheels are so much heavier, I wonder how badly that affects acceleration, stopping distance, etc... Assuming they're 20lbs heavier per wheel (just a guess... I could be way off), factoring in rotational mass, that's effectively 320 pounds that's being added.

 

[Idaho Savage]

Thanks. I recall reading some comments about the wheels being a direct fit so I assumed no spacers were needed. I guess I'll have to do a bit more research.

Also, given that the wheels are so much heavier, I wonder how badly that affects acceleration, stopping distance, etc... Assuming they're 20lbs heavier per wheel (just a guess... I could be way off), factoring in rotational mass, that's effectively 320 pounds that's being added.

Read this thread .. It's well discussed. I don't know if spacers are required or not... I already had them.

 

[starclassic]

Anyone that has the 18” Aluminum Tundra Wheels and needs a spare. I had to buy a full set for a spare. I have 3 left over. I started a for sale thread. For Sale - 18” Tundra Wheels for Spares

Great idea. Anyone running Rock Warriors want to go in on a set so we can all have full size matching spares?

 

[dinnertime]

Great idea. Anyone running Rock Warriors want to go in on a set so we can all have full size matching spares?

I need a spare as well.

 

[FrankieJoe14]

Yeaaaahh boys!

Tundra TRD Pro wheels. Still have to persuade the front caps on but love the look .

285/65/18 K02

 

[bucfl]

Can you make the front caps fit? That’s a sexy look!

 

[FrankieJoe14]

Can you make the front caps fit? That’s a sexy look!

Yeah I saw some guys in this thread pounding down the dust cap and making it work. These are the same rims as the regular Tundra just finished in black.

 

[mtlobo76]

Tundra wheels, 275/70-18 TG 2 with 1" spacers

This is a fantastic look. I'm assuming there's a lift involved?

 

[LandCruiserPhil]

Nope AHC and lovin the set up

 

[mtlobo76]

Less is more. This is one of the cleanest looking LC's i've seen on mud. Excellent job. Post more pics. I wish I had the silver paint!

 

[mtlobo76]

straight sensor lift? thats it?

 

[MattSEG]

 

[TangoTango]

Put them on tonight.

275/70/18 KO2's. AHC, no spacers, everything else is stock.

Will hammer the caps soon so I can put the wheel covers on. The rears had no problem.

 

[implayaz9]

Considering getting some rock warrior wheels. Would I need to run spacers to run them on a 99 land cruiser?

 

[G-Cat]

Considering getting some rock warrior wheels. Would I need to run spacers to run them on a 99 land cruiser?

If you want to run the center caps...yes.

 

[LX470MK]

18" Tundra steel rims; painted golden. Still trying to figure out how to install the centre caps... don't want to go for spacers.

 

[bucfl]

If you want to run the center caps...yes.

Can you pound the caps in a bit and not have to use spacers? If not, anyone know what minimum thickness spacers?

 

[JayTortugaTee]

200+ tundra trd wheels.
And yes you can make the cap fit.
The red TRD badge comes off and you can replace with silver toyota badge.

 

[implayaz9]

If you want to run the center caps...yes.

@G-Cat So if I decide to run these and dont care about the center caps, I could run them without the spacers?