Here is the final confirmation of what I have put together for my 1HD-FT to H55F setup. I went with the 300mm versions of the clutch and flywheel assembly.

Steve
- H55F = 33030-60450 from LHM Toyota
- H55F 21 Spline Input Shaft = 33311-60170 from LHM Toyota
- H55F Shifter Assembly = 33530-60220 from LHM Toyota
- 1HZ to H55 Bell housing = 31111-60230 from LHM Toyota
- Clutch Fork = 31204-36110 from LHM Toyota
- Clutch Fork Boot = 31126-60070 from LHM Toyota
- Clutch Slave / Release Cylinder = 31470-60161 from LHM Toyota
- Pilot Bearing = 90363-15017 from LHM Toyota
- Thrust Bearing = 31230-60130 from LHM Toyota
- 300mm 1HD-T Flywheel = 13405-17020 from Akella
- 300mm Pressure Plate = 31210-60122 from LHM Toyota
- 300mm 21 Spline Clutch Disk = Exedy NCD 34461 from Phoenix Friction

Steve
Last edited: