davidp14
SILVER Star
Oem regulator? Did you replace the motor as well?
Builds 1993 refreshed (now gone) and 1995 build up with new OEM engine (1 Viewer)
- Thread starter SNLC
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #522
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #523
I went for the quick and dirty on these.
In the past we have made a new bracket to hold the tweets in the dash. I didn’t feel like taking the time to do that on my Cruiser. So I notched the plastic housing and glued them in.
I am really trying to like this head unit, as mentioned earlier in the thread it’s my first double din and touch screen, ever! I guess I am just old school and like a single din plain jane head unit.
Fired up the new sound system to test it all and make sure I am gtg. The last couple hours I been been rocking just two front door speakers and the sub. Man, I have missed having a nice sound system in my Cruiser! Since I put this one on the road it has been absolutely ass for sound system. I also have not had a Cruiser with a sweet sound system since 2017, so ya I am pretty stoked to say the least. I have done a few builds now with the Morels, they are really stupendous!
Cheers
In the past we have made a new bracket to hold the tweets in the dash. I didn’t feel like taking the time to do that on my Cruiser. So I notched the plastic housing and glued them in.
I am really trying to like this head unit, as mentioned earlier in the thread it’s my first double din and touch screen, ever! I guess I am just old school and like a single din plain jane head unit.
Fired up the new sound system to test it all and make sure I am gtg. The last couple hours I been been rocking just two front door speakers and the sub. Man, I have missed having a nice sound system in my Cruiser! Since I put this one on the road it has been absolutely ass for sound system. I also have not had a Cruiser with a sweet sound system since 2017, so ya I am pretty stoked to say the least. I have done a few builds now with the Morels, they are really stupendous!
Cheers
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #524
Mounted in the dash grills.
Yup not centered. This took me about 20-30mins vs fabbing a bracket from scratch. A bit ghetto but it is a passing grade on my truck.
Cheers
Yup not centered.
This took me about 20-30mins vs fabbing a bracket from scratch. A bit ghetto but it is a passing grade on my truck.Cheers
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #525
Cerakoted outside and inside.
Fun part going on here.
Cheers
Fun part going on here.
Cheers
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #526
Final on the carpet.
Doing the final install on it after a lot of fitment. Fit it, cut it, adjust, take it out, trim it and then finally do the last install. I am glad we can get these but they are A LOT of work to fit. All the cutting takes a fair amount of time and there is very little room for error. Happy it is nearly done and again happy we can get these, my old carpet is/was super scummy. I would take OEM any day though over this.
Cheers
Doing the final install on it after a lot of fitment. Fit it, cut it, adjust, take it out, trim it and then finally do the last install. I am glad we can get these but they are A LOT of work to fit. All the cutting takes a fair amount of time and there is very little room for error. Happy it is nearly done and again happy we can get these, my old carpet is/was super scummy. I would take OEM any day though over this.
Cheers
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #527
HVAC system is back in the Cruiser.
Cheers
Cheers
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #528
Dash going back in.
I did new dash vents all around and am already in love with them.
Cheers
I did new dash vents all around and am already in love with them.
Cheers
Looks grate. 
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #530
Looks grate.
Wish I could have done a new dash pad. Mine is not cracked, yet, still would have if I could have.
Cheers
- Grate,
a barrier that has parallel or crossed bars blocking a passage but admitting air. 
TheLCProject
SILVER Star
Having to explain your own puns....
Sad, no?
TheLCProject
SILVER Star
Yes! Slow day at the museum? 
Hey now....
TheLCProject
SILVER Star
Hey now....
I'm just jealous of you..and Ian working on another epic build coming out of his shop.
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #538
- Grate,
a barrier that has parallel or crossed bars blocking a passage but admitting air.
Ya but....the way they feel. Its like 1995 all over again. To me that is
Cheers
- Joined
- Sep 9, 2004
- Threads
- 199
- Messages
- 12,352
- Location
- Boise - Idaho
- Website
- www.snlandcruisers.com
- Thread starter
- #539
This one is just my junk, one of two and another on a working list of Cruisers owned.
I don’t plan on getting rid of this one though. We’ll see, I have set a two Cruiser limit for myself and I most certainly want a 75/79-series and a 105 as well and even a 73-series!
Cheers
It's good to have a 7x variant to balance life out. My 74:
