For Sale 1987 BJ73 - Nitro Gear Project "Inigo" 37s Coilovers FRP Top 13BT H55

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Year
1986
Vehicle Model
  1. 70 Series
Location
Mahwah, New Jersey 07430 United States
Mileage
264465
Color
Gray
Outside Link
https://photos.app.goo.gl/F3WecwdzUh6MseUCA
1987 BJ73 built by Justdifferentials for the 2013 Ultimate Adventure. No expense spared by Carl. Perfect for driving to the trail, wheeling and coming home....or just cruise. Road/Highway manners are better than a stock BJ, 65-70 MPH on the highway is very doable. Selling because wife + dog + 3 kids no longer fit.

Price is $30,000 OBO. Pickup in Mahwah NJ 07430. Will help with shipping. Email petyamiller@gmail.com for the fastest response.

Original Build thread: Justdifferentials / Nitro Gear Project "Inigo" 87 bj73 Landcruiser LHD, from Spain - https://forum.ih8mud.com/threads/justdifferentials-nitro-gear-project-inigo-87-bj73-landcruiser-lhd-from-spain.695188/

Images & driving video: https://photos.app.goo.gl/F3WecwdzUh6MseUCA

Suspension:
  • Front Icon 2.5” remote reservoir 12” Travel Coilover shocks
  • Rear Fox 2.5” remote reservoir 12” Travel Coilover shocks
  • Front Hazzard Fabworks custom 3 link / panhard
  • Rear Hazzard Fabworks 4 link double triangulated rear
  • Currie Antirock Rear Swaybar.
Axles:
  • Custom Landcruiser 9.5” (80 series width) custom fabricated front axle housing
    • Nitro 30 spline chromoly birfield kit and axles
    • Aisin hubs with chromoly hub gears
    • Nitro 100 series LC type 4.30 Ring & Pinion with new nitro "big pinion" kit, solid spacer
    • ARB Air Locker
  • 80 series Landcruiser 9.5” rear full float disc brake rear axle
    • Nitro Chromoly 32 spline 300M full float axles
    • Nitro 100 series LC type 4.30 Ring & Pinion with new 32 Spline Nitro "big pinion" kit, solid spacer and upgraded yoke
    • ARB Air Locker
Other:
  • 13B Turbo-Diesel
  • H55 5 speed
  • 2007 Toyota 70 Series grille, marker lights update
  • 4:1 Advance Adapters Transfercase gear kit with 10% Highrange reduction & Rebuild
  • Crossdrilled cryo'd rotors / ceramic pads based on OE LC 80 series disc brake
  • 37" Nitto Trail Grapplers on Hutchinson Rockmonster Aluminum double beadlock wheels x5
  • Hazzard Fabworx custom Front bumper, rock sliders, skidplates, Trans Crossmember, Roll Cage
  • DC Custom Fab Rear bumper with Swingout tied to rear door for easy access. Can open Left door without opening swingout. Integrated low-pro receiver.
  • Warn 24 volt XD9000 winch w/ synthetic line, Factor 55 Prolink
  • Dynamat sound insulation under carpet, in body sides and doors.
  • JW Speaker LED headlight conversion, Rigid overhead SR LED light bar (24v)
  • ARB 24 volt twin compressor, air tank, Ports at front and rear of vehicle
  • Aftermarket Gauges mounted in dash, In Cab Turbo boost controller.
  • Exide Orbital AGM Batteries in Series for 24V
  • 24 to 12 Volt converter for cigarette jack and Alpine bluetooth stereo
  • Brackets and wired Mini LED tail lights for flat towing


PXL_20240806_151326112.PORTRAIT.webp


PXL_20240806_150454786.webp


PXL_20240806_151544014.webp

PXL_20240806_151347399.webp

PXL_20240806_151102600.PORTRAIT.webp
 
Yes it was listed on BaT. The buyer for whatever reason decided he did not want to pay up.
 
Yes it was listed on BaT. The buyer for whatever reason decided he did not want to pay up.
Thank you for the explanation
 
It will be coming to California! I have been dreaming of making mine like this when it was being built! Serendipity!! Look at my post from 2014 on his build thread!!! So Excited. And my current one is its twin! Pic of my current one.

IMG_3668.webp
 
Well I really had considered buying this one back, but doesn't look like I got to it in time for the bat. And then it was on here and I didn't get to it in time either. I hope you enjoy it! I have a vm-bj73 at Tor fab right now, about to do a 1FZFE coil-pack motor swap.
 
damn, nice one
 

Users who are viewing this thread

Back
Top Bottom