12 Hole Injector Upgrade - Finally Tested (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Before this discussion continues it's only prudent that anyone else contributing needs to post all relevant certificates and degrees.
That will backfire into a 'engineers don't understand the real world' argument
 
Thanks for testing this. I believe the data is irrefutable (much to my disappointment!) but it does beg the question, why did Denso/Toyota go to the 12 hole design if it makes no difference? Surely there must be a reason.
 
Lol @dirtydeeds now pulling out the appeal to authority.

These arguments are like my co-workers that still claim they just 'know' that eating a bunch of homeopathic garbage makes them feel better, in spite of no quantifiable evidence other than their own anecdotes.

@suprarx7nut - nice work.

Thanks!


Thanks for testing this. I believe the data is irrefutable (much to my disappointment!) but it does beg the question, why did Denso/Toyota go to the 12 hole design if it makes no difference? Surely there must be a reason.

I think it's important to clarify this point. I'm 100% sure the increase in holes in the injectors is beneficial in the right engine and that Toyota/Denso knows exactly what they're doing, far better than anyone here. Nobody is suggesting that the 12 hole injectors are superfluous when installed in an engine designed for it. Manufacturing methods have also improved over time so it's become more practical to manufacture smaller holed injectors.

This test was about determining if they provide any measurable retrofit improvement in the 100 series.


Are you an automotive engineer? Are you in the automotive industry?
Before this discussion continues it's only prudent that anyone else contributing needs to post all relevant certificates and degrees.
That will backfire into a 'engineers don't understand the real world' argument

I sense @nukegoat is right here and that no answer is the satisfactory one.

That being said, without reading my resume here, I'm a degreed mechanical (not automotive specifically) engineer and currently spend my weekdays working on data analytics for measurement devices. I think I've got relevant experience and training, but a certificate from a university and a certain tenure of employment in a certain role doesn't make anyone infallible.

Don't take my word for it, run the data yourself if you need. It's all public and the point is for everyone to learn. If you can find an interesting trend that adds additional insight, please share it with us!
 
Thanks!




I think it's important to clarify this point. I'm 100% sure the increase in holes in the injectors is beneficial in the right engine and that Toyota/Denso knows exactly what they're doing, far better than anyone here. Nobody is suggesting that the 12 hole injectors are superfluous when installed in an engine designed for it. Manufacturing methods have also improved over time so it's become more practical to manufacture smaller holed injectors.

This test was about determining if they provide any measurable retrofit improvement in the 100 series.






I sense @nukegoat is right here and that no answer is the satisfactory one.

That being said, without reading my resume here, I'm a degreed mechanical (not automotive specifically) engineer and currently spend my weekdays working on data analytics for measurement devices. I think I've got relevant experience and training, but a certificate from a university and a certain tenure of employment in a certain role doesn't make anyone infallible.

Don't take my word for it, run the data yourself if you need. It's all public and the point is for everyone to learn. If you can find an interesting trend that adds additional insight, please share it with us!
Whooops! My comment was pure sarcasm.
 
Whooops! My comment was pure sarcasm.

Haha, yes, I read it as sarcasm. I debated leaving it be, but figured a non-response might give @dirtydeeds a scapegoat for the test results not matching expectations.
 
Lol @dirtydeeds now pulling out the appeal to authority.

These arguments are like my co-workers that still claim they just 'know' that eating a bunch of homeopathic garbage makes them feel better, in spite of no quantifiable evidence other than their own anecdotes.

@suprarx7nut - nice work.
Are you an automotive engineer? Have you tested 12 hole versus 4 hole? How long have you built 4.7’s for? I’ve been building them since 2003 and have built hundreds of them.

my arguments are based on experience;) Just curious about YOU;)
 
You've built hundreds? Well, I've built 100k 2UZ's. 4-hole injectors feel better, trust me.../s

If you really want to contribute to this discussion, strap the next 2UZ you build to an engine dyno. I do actually think that there could be a measurable difference (~3-5%) in low end torque on an engine dyno but I think the buffer of a bulky trans/t-case/diff/tires would make the difference unperceivable by a human driver.
 
Last edited:
You've built hundreds? Well, I've built 100k 2UZ's. 4-hole injectors feel better, trust me.../s

If you really want to contribute to this discussion, strap the next 2UZ you build to an engine dyno.
I have all that. Check out DirtyDeedsIndustries on YouTube. You’ll have to go back a long ways.

Also check out tundra solutions. Tons of videos have been posted of 2uz on dyno by me. My name on all the forums is either escondidotundra or DirtyDeeds.

feel free to hit me back with any questions. 760-877-4234
 
I have all that. Check out DirtyDeedsIndustries on YouTube. You’ll have to go back a long ways.

Also check out tundra solutions. Tons of videos have been posted of 2uz on dyno by me. My name on all the forums is either escondidotundra or DirtyDeeds.

feel free to hit me back with any questions. 760-877-4234
Is it possible you're biased because you are making a profit off selling these products? Just asking.
 
I think it's important to clarify this point. I'm 100% sure the increase in holes in the injectors is beneficial in the right engine and that Toyota/Denso knows exactly what they're doing, far better than anyone here. Nobody is suggesting that the 12 hole injectors are superfluous when installed in an engine designed for it. Manufacturing methods have also improved over time so it's become more practical to manufacture smaller holed injectors.

I hear what you’re saying but combustion engines are just air pumps. Maybe, maybe if the intake manifold had some design in it that helped the 12 hole injectors but I kinda doubt it.
 
Are you an automotive engineer? Have you tested 12 hole versus 4 hole? How long have you built 4.7’s for? I’ve been building them since 2003 and have built hundreds of them.

my arguments are based on experience;) Just curious about YOU;)
Just like a naturopath, chiropractor, or homeopathic counselor, the scientific data be damned, you have loads of anecdotal experience supporting the products you sell.

lol
 
When we split an atom amazing things can happen, but when we split hairs...

Looking at all the evidence its all marginal differences, and for me it's all "meh". Great work on the tests! Many people have irrational or emotional attachments to many things in their lives, and whatever makes them sleep better at night, so be it. I think 12 hole injectors are one of them. Why stop at 12? At what point are there too many holes? I think it was previously explained there are diminishing returns after 4, but I also might believe essential oils can cure stage 4 brain cancer.
 
Oh, yes, nothing beats a great pyramid scheme. Ummm...I mean legitimate business that doesn't try in the slightest to scam stay at home moms and dads that look to get rich quick. <------hidden message in here in relation to easy HP increase claims to our rigs. Not that anything is wrong with them. Snake oil has been around forever. Forever.
 
I hate beating the departed horse but I have a burning question, did the overall smoothness of the engine change? In the original thread, one member (can't remember who) claimed that he thought the engine has cut off due to idling being silky smooth.
Perhaps it was my post as I remember commenting that installing my 12-holes and starting the truck up for the first time I thought it died because it was so smooth. During the dyno test I made a similar comment to @suprarx7nut right after we swapped in his freshly cleaned 4-hole stock injectors. It really did idle just as good and smoothly on that initial start. My truck had 200k at the time of changing the injectors so obviously they had some issues.

Thanks for testing this. I believe the data is irrefutable (much to my disappointment!) but it does beg the question, why did Denso/Toyota go to the 12 hole design if it makes no difference? Surely there must be a reason.
The inevitable forward march of progress. EPA and international testing gets stricter and stricter, MPG becomes more valuable for marketing, etc. 12-holes do atomized fuel better, because the holes are physically smaller. There's no monkey business. There are thousands of variables in an internal combustion engine that affect the final result so it's completely expected that when we change one of those variables nothing happens. Sometimes you get lucky. Never know til you try.

Either way I ended up with a smoother running, better engine for about the same price suprarx7nut did and we got to meet eachother. Win win.
 
Never know til you try.

Either way I ended up with a smoother running, better engine for about the same price suprarx7nut did and we got to meet eachother. Win win.

Agreed. 10/10 would dyno again.
 
I would think incomplete combustion would show up in O2 sensor data, so maybe it's theoretically faster combustion that's occurring?

yes and no. it will show up as unburned hc in the exhaust stream and your af sensor will detect that so yes you will see incomplete combustion. no because the ecu is always adjusting the fuel trim for a target a/f ratio of 14.7:1 so it is normal to see variations either rich or lean and the correction to follow.
 

Users who are viewing this thread

Back
Top Bottom