Idaho Savage
GOLD Star
Props for the innovation. Don't let the naysayers get you down... It's a proven concept and having ridden in other vehicles with coilovers, it's hard to beat.
ARCHIVE 100 Series Coil Over Conversion Kit
- Thread starter KOR metal FAB
- Start date
-
- Tags
- 100 series
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hi Phil,
Embarrassed to say, that in my haste, I was thinking 10" of lift vs 10" of travel
Though 10" of lift would be fun to see in one of those arena truck challenges where many
s and 
would enhance the affect!
Embarrassed to say, that in my haste, I was thinking 10" of lift vs 10" of travel
Though 10" of lift would be fun to see in one of those arena truck challenges where many
s and would enhance the affect!
All 4 corners kind of gig.
Ah, enlightened (not the first time/not the last time). Thanks gang.
Hi Phil,
Embarrassed to say, that in my haste, I was thinking 10" of lift vs 10" of travel
Though 10" of lift would be fun to see in one of those arena truck challenges where many
I'm grabbing my beer as I type this
- Thread starter
- #87
Here are some finished lower arms off to powder coat. For this run we are doing a metallic gun metal grey with a clear powder coat over.
- Thread starter
- #88
Here are a couple other projects we have worked on recently, I just thought I would share to show the quality of work you can expect from us. There is a picture of spindles we built for a 1400 I beam race truck, and a set of our shackles and hangers for a Bronco.
I shared your kit with a few Land Cruiser pages on Facebook. The initial reception was positive.
I am sure there will enough interest to keep them available until I can save up for my own kit
- Thread starter
- #90
I shared your kit with a few Land Cruiser pages on Facebook. The initial reception was positive.
I am sure there will enough interest to keep them available until I can save up for my own kit
Thank you for sharing our kit, I really appreciate it. It is tough being a small business owner, and trying to justify time spent on the computer Vs. time spent building stuff in the shop. I know it is really important to market products, advertise, and network with others. It is something I am trying to get better at. Again thank you very much for the support, and let me know when you are ready for a kit I will get you taken care of for sure.
Chris
KOR metal fab
Beautiful work, nice job.
So dope! Keep it up. I'm so glad to see this kind of development for the 100-series. Let me/us know how better we can promote this kit or you business. I would love to see some video of your kit in action.
cruzerDave
Land Shark Outfitters
Will this work with SPC UCAs, or only the TC's?
Also wondering if my Tough Dog Ralph's have the right travel for this setup? (trying to save some dinero to make this more doable
@reevesci what do you think?
Also wondering about @LandCruiserPhil's question, total travel =8.5+1.75+1 = 11.25"?
Also wondering if my Tough Dog Ralph's have the right travel for this setup? (trying to save some dinero to make this more doable
@reevesci what do you think?Also wondering about @LandCruiserPhil's question, total travel =8.5+1.75+1 = 11.25"?
Hey KOR, I just wanted to say THANKS for supporting the 100s... they don't get enough love from the aftermarket so thanks for diving in! I hope it makes you RICH! Whether or not I can afford it, I know the 100 community is better for it, thanks for the innovative option!
- Thread starter
- #95
Will this work with SPC UCAs, or only the TC's?
Also wondering if my Tough Dog Ralph's have the right travel for this setup? (trying to save some dinero to make this more doable
Also wondering about @LandCruiserPhil's question, total travel =8.5+1.75+1 = 11.25"?
I don't know for sure if it will work with those arms, but I can't see why not. I imagine they are built very similar to the TC arms.
- Thread starter
- #96
Thank you for the support, I really appreciate it. Any advertising or promoting for our company is greatly appreciated.
- Thread starter
- #97
- Thread starter
- #98
I think the 100 series is a great vehicle, and one of my favorites to drive. We make several other custom parts for these, however, we are not scaled up to make large production runs so I have been holding off on posting about them. We do though make a diff drop kit, Rock sliders, rear shock guards, a front LED light bar kit, as well as front and rear hydraulic bump stop mounting kits.
please post photos of the other 100 series parts
Would love to see the hydraulic bump mounts.
