wiring

To make a long story short, the rear LSD on my 99 LX 470 blew up a few months ago. Instead of replacing it with another LSD, I had the shop I took it to install a locking rear axle from a 98 Land Cruiser. ABS wires and brake lines etc were swapped from the broken LSD axle to the new locking...

Hello, Was replacing my license plate lights and had to resplice some wires due to a corroded correction. Got the lights to work, but now my backup camera is not working. Does anyone have a wiring diagram so that I can find where I went wrong, or what needs to be repaired. Any information much...

Now that the Beast is gone, I can concentrate on other projects. My FJ40's electrical wiring is an absolute mess and it drives me crazy. Grounding issues, wires sliced / diced, dead wires just hanging around. I am also considering adding an electrical heater & USB ports; so I need some extra...

I've got a question about seemingly unused connectors in the main wiring harness under the dash on my 79 FJ40 (USA) project. Answered below, thanks! It had been previously desmogged with all smog components removed, but with the main harness mostly intact. The rig has most of the factory...

Greetings all. I've been down a rabbit hole of sorting out code P0453, high voltage on vapor pressure sensor on my 2009. I'm a bit stuck and hoping one of the experts here may have some ideas. To date I have replaced the purge solenoid, gas cap, and last year the leak detection pump, which...

Hi All: '97 North American Landcruiser Here. I want to upgrade my old stock amp but keep the stock factory head unit in place. First, I know that there's lots of information here about Swapping the stock head unit and bypassing the amp via traditional method, but that's not what I'm trying to...

Hey All, I've searched across Mud but couldn't find a definitive answer for this so posting here. I recently replaced both o2 sensors on my 94 with these NGK 24080's after I was getting a persistent code 26 check engine. After replacing the sensors, I then replaced the original connectors with...

I just bought my new lc80 which is gcc spec so its fully loaded from diff locks to rear ac ,ice maker and adjustable suspension etc. the old owner had installed extra fans for the ac and 2 headlights which i didn't like so i removed them here where my problems began . Next day my battery was...

As title states, my rear and side lights are not coming on when turning on headlights. Taillights work fine under breaking but not when headlights are on. I checked the TAIL fuse in the fuse box and that isn't it. Anyone have any troubleshooting suggestions on where to start? Thanks!

I live in Norway and have been restoring a HDJ80 for some time now. Just before the summer the engine wiring started to smoke so I quickly turned everything off and took the terminal from the battery. Noticed then as a stripped the wiring the some had melt som I need a new one. When I then...

Hey all, I recently had an incident involving the side of my garage which ended with me needing a new mirror. Found one on Ebay, same color code, advertised as folding, heated, etc. No biggie right? Figured it would be an easy afternoon install. Well the mirror arrived today and I got to it...

Hey all, My headlights on my 97’ 75 series have been cutting out, aswell as the headlight relay clicking. I recently installed spotlights and checked all the wiring and it’s not that. I think ive tracked it down to a degraded wire on the positive terminal. See photos: before removing it had a...

So I recently replace my exhaust system from the manifolds back and the job went really well. Like a little too easy. Job was done cranked it up and still had the reoccurring code 28.... so I dug in a bit and started tracing back wiring. I find that the previous owner had spliced the O² wiring...

Hey, all. I thought this would be a much simpler thing to research, but there is a lot of conflicting info out there. I am wanting to install an antique dash clock in my FJ45. Most antique dash clocks run off 6V systems with the FJ, obviously, being 12V. What is the easiest, and safest way to go...

Was trying to wire up an arb rear bumper, didnt do anything on the truck but plug in the bumper (previously wired for a 100). Went to doble check lights, now no running or brake lights and starts but wont go into drive unless i manually override the shifter. Any ideas?

2LTII, near the starter

Can anyone ID these wires from the turn switch of a 78’ fj40 for me. I’m doing a new chassis harness from American autowire. I have searched a ton and still not great. success. Thanks.

275.00 before shipping. You get the trinkets attached to it. I’m not sayin they work. You just get them. Let me know if you need closer pics of any section.

Hi Guys, I trying to get this book. I wonder if someone has it and will be willing to scan it? Otherwise I will have to order it from a shady provider in Netherlands.

I would like to install a pusher fan to increase AC cooling during summer together with a revamp AC system and parallel condenser. I'm not very good at wiring, even reading electrical wiring diagram so I would need the instructions that a 6 year old would understand. Reading ABC of cooling, I...