wiring

Hey, all. I thought this would be a much simpler thing to research, but there is a lot of conflicting info out there. I am wanting to install an antique dash clock in my FJ45. Most antique dash clocks run off 6V systems with the FJ, obviously, being 12V. What is the easiest, and safest way to go...

Was trying to wire up an arb rear bumper, didnt do anything on the truck but plug in the bumper (previously wired for a 100). Went to doble check lights, now no running or brake lights and starts but wont go into drive unless i manually override the shifter. Any ideas?

2LTII, near the starter

Can anyone ID these wires from the turn switch of a 78’ fj40 for me. I’m doing a new chassis harness from American autowire. I have searched a ton and still not great. success. Thanks.

275.00 before shipping. You get the trinkets attached to it. I’m not sayin they work. You just get them. Let me know if you need closer pics of any section.

Hi Guys, I trying to get this book. I wonder if someone has it and will be willing to scan it? Otherwise I will have to order it from a shady provider in Netherlands.

I would like to install a pusher fan to increase AC cooling during summer together with a revamp AC system and parallel condenser. I'm not very good at wiring, even reading electrical wiring diagram so I would need the instructions that a 6 year old would understand. Reading ABC of cooling, I...

Looking for a 1979 Wiring Harness for a 1979 FJ40. Let me know if what you've got - I would also consider 1980+ Thanks, Chris

I threw a hopkins plug n pray kit on my rig when I got it and it has never worked correctly. Now I am thinking of trying this one instead. https://www.amazon.com/dp/B001GBJQS4/?tag=ihco-20 Anyone use this on their 80 series? Thanks

Does anyone have the wiring diagram for the turn / wiper / light switch? My switch works fine except the connection for the bright lights appears to have a short or broken wire. My brights will not go on though I can blink the light by pulling back on the switch.

I am tying up my 40 build. I would like to wire my brake fluid pressure switches. I am missing plugs on the drivers side fire wall and just have bare wires. Since i am running a GM 1 wire alternator I don't have the voltage regulator hooked up. anyone have a detailed photo of which plug is...

it doesn’t have to be perfect. The engine is 2F so it will need a little modification. Thank you.

I hope this makes sense.. say i have a circuit with 3 lights (5amps each for a total of 15amps) on it all in a line from the fuse. 1st one is 5 feet from the fuse, 2nd is 10' and the last is 15'. Can i start with 10awg (The calculator i used said 10awg is correct for 15' at 15amp) that runs...

Talking with @ToyotaMatt sourcing parts for the wife's FJ40 and am wondering if anyone out there has ever seen a 6th wire going to the taillight housings? The late model plugs are a 6 pin, such as the one listed on ebay here, but there are only the 5 wires going to the housing. Has anyone seen...

I've been poking around here reading up on GM alternator swaps and I had a few questions. I'm going to be installing a PowerMax CS130 on the Vintage Air bracket made for this purpose. I'm going to be doing a 1-wire configuration, running a 6 gauge cable to the battery and a 6 gauge ground to the...

I did a search but on my phone it's a little harder. The running lights quit working on our 99LX470. The fuse blows immediately when replacing it. Brake lights, reverse lights, headlights and fog lights all work. I took the tail lights off and all wiring is good and not sure they had ever been...

Hi all, I've had my paper copy digitised - thought others may find it useful... mine is a European spec so I'm working through any differences. If it works I'm goign to import to Visio and edit a version for my vehicle. I'll share that if I can do it!

The headlights on my truck are pretty awful, and I'm trying to figure out how best to go about making it safer to drive at night. I have my eyes on the City Racer LED lights, as well as the KOITO 8110-60P70 Kit - I don't have a preference for either, so long as I can see adequately at night and...

I’m trying to wire an aftermarket radio, these wires were right behind the receiver slot. The left two wires are showing 11-14 volts on a multimeter regardless of key in on position. I want to wire the receiver to constant and switched power. Will if have to fuse tap for switched power? Or what...

I was cleaning up some wiring mess under the dash of my FJ80 prior owner had a mess under there from a security system, and wiring up radio with speakers and whatnot.. After I got done everything works fine got back from a 30 min drive doing some errands shut truck off keyed it back on to check...