Search results for query: *

  • Users: GeoW5
  • Content: Threads
  • Order by date

Forum search Google search

  1. GeoW5

    Welding in new box frame

    So I am going to replace a section of the front cross Member that also holds the steering gear box as someone hacked out a section to fit in a Saginaw gear box. I am going to grind out the rivets and replace the section with a used piece. What does anyone recommend using to replace the rivets...
  2. GeoW5

    Keeping my FJ40 & Starting 3FE RestoMod

    Wife & I decided to keep FJ40 and are doing the restomod using the 3FE engine, 5 speed transmission, and 60 series axles with disc brakes! I just got back from a trip from NC to VT to Cruiser Parts to get my stuff; see pics. I also picked up a small AL gantry crane to roll in and out of my...
  3. GeoW5

    Parting Out  Selling 1965 FJ40 with title, but no engine, tranny, or T-Case

    All, I am selling my 1965 FJ40 project. I originally bought to restore it. I could not get valves and other parts for the engine and ended up selling the engine, tranny, and transfer case. I have the tub with doors that have been modified and other parts. I have lots of new items such as a...
  4. GeoW5

    For Sale  Swansboro, NC. Still have lots of 1F engine stuff for sale...

    Still have lots of 1F engine stuff for sale. I am open to negotiation on multiple orders. Please have an idea of what you are willing to pay before PMing please. If I don't obtain reasonable offers I will take it to the dump before I just give it way as its a pain to lug it to the UPS store...
  5. GeoW5

    For Sale  1965 1F engine parts for sale

    hello, I have a bunch of 1F engine parts for sale to include the head and the block. The head and the block were cleaned by the machine shop which also bored the cylinders to .030 over. I am selling because we decided to go a different direction with a new 3FE engine since this FJ40 is not a...
  6. GeoW5

    For Sale  1965 1F engine and associated parts for sale

    hello, I have a bunch of 1F engine parts for sale to include the head and the block. The head and the block were cleaned by the machine shop which also bored the cylinders to .030 over. I am selling because we decided to go a different direction with a new 3FE engine since this FJ40 is not a...
  7. GeoW5

    For Sale  Swansboro, NC. 1F engine parts

    I have decided to go with another engine option for my 1965. These parts are associated with that engine. Some of them are new, but most are used. The Engine head has been cleaned. It is dissembled and there are only a few of the valves that are good. Note: this is the early Siamese engine...
  8. GeoW5

    Anyone have pics of putting a 5-speed behind the 2F engine and the frame mods required?

    All, So going to do the 2F engine swap into the '65 with the Holley Sniper setup. Looking for pics and posts on what mods it actually takes to move the crossmember and put in the supports for the engine and tranny to their new locations. Thank you
  9. GeoW5

    Help with ReAssembly of 3-speed transfer case for 1965 FJ40

    All, I am reassembling a transfer case. I have two spacers that I can’t figure out where they go. I have the appriopriate ones for the transfer case rear output shaft and transmission output shaft. I am pretty sure there’s not one for the front drive so that leaves them for the spacers on...
  10. GeoW5

    Converting 3speed transfer from dash to floor

    I am moving the dash transfer case to a floor shifter. Anyone have a way to cut the three speed tranny tunnel cover to add the floor shifter for the transfer case or do i buy another cover. if i buy another what fits a ‘65 FJ40?
  11. GeoW5

    Converting Vacuum Shifter xfer case to floor shifter

    Looking for options other than SOR for floor shifter conversion. THere’s is good, but before I jump on that I wanted to see if there are other options out there for converting from vacuum to a floor shifter setup. I know I either need to cut an access hole or purchase another transmission...
  12. GeoW5

    Where to get H2O pump/rebuild kit for 1F eng?

    I looked on SOR, but they didn’t list one. Any ideas of another vendor? Thank you
  13. GeoW5

    JT Outfitters PS bracket

    All, I finally got around to getting the power steering pump to fit the JT Outfitters bracket to adapt power steering pump to my 1F engine. I’m going to have to fabricate the bracket to clear the thermostat housing but overall I was able to get the power steering pump to fit in the bracket. The...
  14. GeoW5

    Heater core hoses 1F engine

    on the 1F engine, what ports off the engine and return to the engine are used? i know mine is bypassed since the heater was disconnected. also what lower radiator hose is used since i am going to use an aftermarket heater and i dont think i will need the cast iron down pipe with the valve for...
  15. GeoW5

    OLD gm steering column or adapt an OEM steering column to already installed saginaw pump setup

    all, this fJ40 came with a saginaw pump, steering box, and a GM steering column. No idea where the OEM steering column or wheel are at. I have the parts to rebuild the GM column and I do like the turn signal and tilt column aspect. but I was also thinking that since I now will be able to...
  16. GeoW5

    OEM 1bbl carb or the weber conversion?

    all, Not sure which way to go on this. since this is not going to be a 100% OEM restoration, rather a run to town grocery getter and run around the property vehicle that will look mostly correct I am at a decision point of whether or not to do the weber conversion. I have the weber and I have...
  17. GeoW5

    Wanted  Early '65 Fuel Pump rebuild kit

    I have both fuel pumps; one with the priming lever and another without. I would like a rebuild kit for either if someone has a link? Thank you George
  18. GeoW5

    Trying to remove this nut off the transfer case

    Any ideas of how to get this nut off? It’s on a 3-speed xfer case front axle drive output shaft. I have tried soaking with PB blaster and also using heat. No luck. Next idea is to freeze over night and then add heat to nut and quickly try and air gun it off. If I can figure a way to hold the...
  19. GeoW5

    paint type/brand and color used for seat frames, glove box, & ash tray

    All, What paint is recommended to repaint my glovebox lid, ashtray, seat frames, and other silver/gray color? george
  20. GeoW5

    Clutch Inspection and rear main bearing R&R

    All, I finally dropped the clutch today. According to the FSM you only have to have .03mm whereas I was measuring 1.56mm. What I don’t know is the value for a new clutch in that is this clutch half way through its life? I also noticed the bolt heads on the pressure plate lever arms are...
Back
Top Bottom