...out of your vehicle and it's not a motorhome or other large RV, this little trick can enhance your experience. I replaced my wall kit for my 270* Alu Cab awning on my off road trailer with 2 of these. Versatile and quick to set up and take down, you might want to check this out...
Some more ideas from iKamper that are worth considering for overlanders:
https://expeditionportal.com/ikamper-introduces-a-new-wedge-style-rtt-and-a-270-degree-awning/
This trailer was built to tackle the Rubicon. It's not an old pickup bed converted to haul camping gear and slap a RTT on it. It's stout - for example - the axle is not the typical 3500 lb HD for ruggedness. It's the 5000-6500 lb - I know , I packed the wheel bearings. Running 35" tires on 15"...
Is any one using one of these. I read up on propane stoves, because I wanted to replace my old Coleman 2 burner 413E that's served me well, but aging. I've been experiencing a lack of control of the flame intensity and heat control, which I'm sure can be at least part way cured with a rebuild...
...CVT, I added several mods keeping in mind that my goal was a teardrop, so I'm able to move some of them to this trailer. I've already moved the 270* awning, the off road trailer jack and will be setting up the MaxCoupler on it eventually. I got the wall kit with the AluCab awning and it works...
...maintenance is critical. Carfax shows at least 2 previous owners, maybe 3.
Highlights of Carfax:
* Last dealer maintenance was back in NY in 2011 with milage 73770 and all the comments said was: "Maintenance inspection completed" - whatever...
Not sure if anyone else has tried this, but it works so well for me I thought I'd share the idea. The older we get, the harder it is to get some things done that we used to not even think twice about doing. And I'm sure that upgrading from the original 31" tires to 35" tires, since they're...
Last month (April 2019) I found this trailer on CL in Bend, OR. Decided not to wait up to a year to have a hard side / teardrop style trailer built as I had originally intended and purchased it.
The Land Cruiser was just getting too full and impossibly inconvenient for overland trips. The...
Just watched a very interesting video by Gale Banks at Banks Power. They fabbed a clear diff cover so you can watch the action of the ring gear flinging the oil at different speeds. And he talks about custom cover designs and cooling and the level of diff oil in reference to axle tubes.
Video...
Well, with over 275 K on my '94, that I've owned for 20 yrs and added 150 K, it's time for some tender loving care (1st TLC in title...lol). It has served me well and to be honest, that's an understatement. I'm 63 and retired, plus the 80 is not my DD, so I'm blessed to be able to work on my rig...
Figured with all the inputs I've been giving on other threads, I should start my own for reference and so comparisons and analysis should be easier if all in one place. Feel free to post comments and questions. First off the vendor website page that this tent is on:
CascadiaVehicleTents...
Need '81 Mini Pkup parts:
1. - PS headlight bezel w/corner lamp housing & corner light lense for both sides.
2. - Front PS side clearance light housing w/harness and lense.
3. - Both taillight housings w/ lenses.
If you have any of the above in good condition available for sale, please PM me...
My Costco (Bend, Oregon) has a deal on LED headlamps - check it out at yours. They're in the Auto/Sports area. You get 3 lamps with Duracell batteries for $9.99! They are excellent fit with 4 position switch - off, high, low and flash. Adjustable strap and tilt on beam direction. Acceptable...
Since I installed RT's temp gauge mod, I've had concerns that my engine temp on hills is climbing too high. It doesn't matter what the air temp is, it seems to be load dependant. I can just about tell if I'm on an incline by looking at the gauge. Flats and down hill and it'll drop back down...
...to other wires or components around it. If you look closely at the holder in the following pic, you can see the evidence of overheating, which was my 1st clue that my problem was more than a blown fuse, when my aux lights failed their 1st test:
That's why I cut the ***** open with the...
Well, I searched and couldn't find any similar threads, so here goes. I had a surprise as I was washing the bugs off my ARB bull bar this evening. Using the water pressure to clean them off, it started lifting the powder coating off. We have good water pressure here, locally, but this was...
Any opinions to how long a loose double cardan joint on the front drive shaft will last? It's pretty sloppy. I can hear/feel it vibrating in 4wd at 5 mph. I'd say there's a good 1/4" - 3/8" movement if you grab it and try wiggling it. It's an '81 with '85 engine,tranny & xfer case. Also no lift...
1981 4X4 LB PKUP ?'s
Howdy,
There's a 1981 long bed 4X4 SR5 for sale near me and I've wanted a solid axle mini-4X4 pickup since I missed my chance back when they came out in '79. I know '85 was the last solid axle, but how's the engine and rest of the drive train? Any bugs or things to...
What are your experiences with tires on trails getting sidewall damage? I know a lot of folks reduce the tire pressure to get more traction. Initially, it went against logic for me because I figured, with less psi in tire, sidewalls would be weaker and more susceptible to damage.
Well last...
This thread is started in an attempt to separate old fan clutch questions from Landtank's Blue Fan Clutch thread which discusses and instructs how to set up the new part Toyota replacement fan clutch. For first timers to this thread, this is an attempt to discuss the possibility of revamping...