- Thread starter
- #121
Anything special to note on installing the ASAP flaps with the ARB rear?
Nothing at all! They bolt right on with no modifications or anything to figure out. Super simple! Congrats on the ASAP flaps! I love mine!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Anything special to note on installing the ASAP flaps with the ARB rear?
It’s got the Z24 in it. I originally thought they all came with the KA24 like in the Nissan 240SX. Found out that was in the later models. Odd motor! When I first bought it I was doing some maintenance and purchased 4 spark plugs. I swapped out the 4 on the driver side and noticed there was 8 spark plug wires coming off the distributor. Followed a wire to the passenger side of the head and found another 4 spark plugs under the intakeThat's the perfect iteration of the d21- do you have the z24 or vg30 in it?
Do you happen to recall exactly which SEM Color Coat you used for the speaker covers? I need to do this same job and I have the same color interior. Much Appreciated!The original CB I got was way to big to put anywhere. So I got the small handheld version from Cobra, the 18 WX ST II. I hung it from a Slee Off Road CB Mic holder and Switch panel.
Cobra dashcam and radar detector hard wired into the truck.
Greyman Tactical Molle seat back panels outfitted and installed
Lloyd Mats are in. You can see the speaker grilles in this picture. I thought the fabric was gross and outdated. So I peeled the fabric off. To my surprise there was a much nicer pattern underneath. So I painted the plastics to match the door panels using the SEM Color Coat.
View attachment 1856452
View attachment 1856453
View attachment 1856454
View attachment 1856455
View attachment 1870955
I used SEM Color Coat part number 15853. It came up as a Toyota ivoryDo you happen to recall exactly which SEM Color Coat you used for the speaker covers? I need to do this same job and I have the same color interior. Much Appreciated!
Very much appreciated! Ordering today!I used SEM Color Coat part number 15853. It came up as a Toyota ivory
Who makes that zippered pouch attachment on your headrest? I know it’s not greyman. Thanks manGreyman Tactical released a headrest mount. It used to be hung with a strap tied to the top of the panel and up and around the headrest posts. As you can see after 5 years of hanging the straps have crushed the top foam of my seats. Also with the straps the panels are a little more flimsy when they have a rifle mounted to them. These headrest brackets have really tightened things up. No more slop and a much cleaner look.
View attachment 2923100
View attachment 2923101
Blue Ridge Overland Gear makes the velcro head rest panels. They also make the pouches.Who makes that zippered pouch attachment on your headrest? I know it’s not greyman. Thanks man