Where's the best place to purchase hoses for my Saginaw conversion?
Is it better to go with braided stainless steel?
Thanks
Is it better to go with braided stainless steel?
Thanks
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
What did u get gear box off of I am looking to do the same swap. Thanksi need those two. Recently I've found common threads. great
What did u get gear box off of I am looking to do the same swap. Thanks
i would highly recommend running a ps cooler as well.
these work very well:
B&M 70255 - B&M SuperCooler Oil Coolers - summitracing.com
i use them on every ps conversion i perform. i will not do a conversion without a cooler.
Champion uses 1/2-20 straight threads for their tranny cooler ports. I found some 1/2-20 to -6 AN fittings and will be using those to plumb the cooler to the steering box (I'm running a ported saginaw to a redneck ram from west texas offroad).One question
If I've a champion rad with tranny cooler ports, will such ports work for the gear box? If so, how do i plug it?
Thanks
One question
If I've a champion rad with tranny cooler ports, will such ports work for the gear box? If so, how do i plug it?
Thanks
Champion uses 1/2-20 straight threads for their tranny cooler ports. I found some 1/2-20 to -6 AN fittings and will be using those to plumb the cooler to the steering box (I'm running a ported saginaw to a redneck ram from west texas offroad).
This is my plan too.