Whatever route you choose on the valves, my suggestion would be to at least replace the valve stem seals. Our 94 burns oil like crazy, and with all the other new parts you have, you’re gonna kick yourself every time you dump a quart of oil in...
I can agree with some of everything I read here. OP choice has been made so little point in digging into that. The new OEM might bring some premium to the value for resale but Im not sure it does so enough to make up for the investment itself...
Came across this yesterday; for future reference. Photos cribbed from @flintknapper's post (linked below)...
https://forum.ih8mud.com/threads/temp-sensor-part-number.1254586/post-13889084
Water tank installed! Feels great to have 15 gallons of water stored hidden and low. The tank is baffles so no sloshing. I added some bushings to isolate the tank between the body and chassis. The pump and fill works great. Im planning to get a...
The install of the transmission went very smooth. We raised it up with just a bit of clearance to the dowel pins and then had to adjust some angles. It slid right in. All the bolts lined up, torqued them.
This kit moves the transfer case back...
Camshaft specs listed here: 284/284 | Stage 3 1FZ-FE - https://kelfordcams.com/product/toyota-1fz-fe-stage-3-high-performance-camshafts
Then lobe separation angle/LSA is 105.5 so it’s a pretty narrow LSA.
I taught myself how to tune for the...
I bought my 97 back in August, sight unseen, from a Mud member in WA. I bought it because it looked like a good one, and I was pleased to see that I actually got a nice one. One thing led to another, and despite the fact that this is an off...
Almost anything is possible, the impossible just takes a little longer and a hell of a lot more money.
Do keep in mind that the US transfer cases are not compatible with a PTO.
Looks like every farm tracor PTO shaft I've ever seen.
How fast does that shaft spin? Couple hundred RPM or a couple thousand?
If it's a fast spinning shaft, I think I'd want to get the splines tighter. No idea if the parts even still exist...
Installed some new-to-me door cards all around. New window regulators/motors from Cruiser Outfitters, added some sound deadening to the inside of the doors, new vapor barriers, new window seals along the inside of the door panels, and some One...
I have started printing some overhead consoles for the 80 series trucks. There a few to choose from. Gray and tan/oak. Im planning making a few other designs. Maybe one for a CB radio, a blank plate so you can cut your own holes, and anything...
I have 4 Toyotas and they all get Costco Batteries.
**Costco has every Purchase on your Card you made there at the Customer Service Desk, so you will need Luck Returning one you did not buy there.
I live in Ohio and my DD Corolla has a...
While I am at it, here is the full tutorial on how to get the current LC70 service manual running on any Android smartphone or tablet. All other HTML based service manuals will work too, it follows the same principle.
Here we go, let me know if...
Yes.
I may write up a full tutorial some day, for now try this rough guide:
Install f-droid
Install termux through f-droid
Within termux install nginx (pkg install nginx)
Put the files of the service manual in the nginx web server path
Start...
I have a recirculation valve on the turbo, that replaces the blow off valve and allows that air to stay in the intake tract so you have better throttle response. I am not running a MAF using the Haltech you can use MAP so there is a pressure...
No with the Haltech an extra injector is not needed you can just add larger primary injectors. The stock are ~315cc, the ones I used are ~600cc. The water tank is completely custom, it cools the IC, holds windshield washer fluid as well as...
I ended up choosing function over form and went with a Sony CarPlay head unit instead of a Blaupunkt/period correct deck. This one just got discontinued but has a capacitive screen. The new version is identical but just adds an HDMI port, which I...
Hey all. Sorry for the radio silence. It's been a crazy past year with a new kid and more work responsibilities. I do hope to get back into the swing of things again, but I can't say when for sure.
Cleaning power steering reservoir and flushing it's fluid. Keeps Vane pump and rack & pinion in top condition.
These step will help you get, a better idea on how to.
Power wash reservoir & hoses using a degreaser, before starting service. Makes...
I went through this thread pretty thoroughly, so if this has been covered feel free to roast me.
I found a cheaper alternative to getting a replacement reservoir for these trucks if you aren't in need of the metal bracket. I can thank an old...