Outsane's latest activity

I can make these for you

Fake parts are getting more common.. May want to avoid ebay and Amazon for new parts.

I have everything you can do to a 1HDT (rebuilt), and I was told reliably I can only get 200WHP out of my 1HDT. After everything I've done, it's WAY faster / more torque, that's for sure, compared to when I had it stock.

4th inline

Mine doesn't block the mirror any.

I usually double nut method. Where you tighten the nuts to themselves on the threads and use the nut on the inside to untreated the stud. I hope that makes sense, if not a video can help.

Its a beauty

The 100 series pads cover a little more rotor then the 80 pads. I am skeptical if there are any real benefits. At the same time you loose the ability to quickly see how much pads material you habe left before you need to replace.

Fender well cleaned up nicely after removing the insulation. Timing belt looks great. According to the Japanese sticker it was last replaced 6 years and about 65K kms ago.

@davidp14 100lbs of rocks?

Emptied the truck full of junk (and 100lbs of rocks). Gave her a quick rinse. I'll try and wash it for real tomorrow. Then changed the oil. Filling up was super quick thanks to my new funnel from solve function. I didn't time it, but it was...

Some one asked me for an ambulance door cover.. So I made one..its printed and cheaper then most used ones (won't rust). https://solvefunction.com/shop/ols/products/ambulance-door-panel Now thats its added out, I can have these made of...

Thank @FJ73Texas for sending the original

Made some adjustments to the dimensions https://solvefunction.com/shop/ols/products/zx-badge-75441-60230

I added and made a few, i haven't found the perfect gold yet.

The buyer is the guy the rest of us cosplay as when we're Broverlanding. Spends a year at a time out on trails. One of his objectives is to cross through the Darien gap in the next 2 years.

@Delta VS now makes the photogenic kit, its great. https://www.deltavs.com/all-products/1fz-alternator-upgrade-kit-and-components

Got the @Outsane Whiteline rear sway bar brackets installed...love these! They put a nice slide angle from the rear lower link mounts off of the rear of the axle so it doesn't bash the sway bar mounts. Also installed (but not shown) Window...

😪

That's rad. I've been slowly adding tools to my collection every time I run into a snag. Works well if you don't have to daily the truck and it can be down long enough for a HF run or Amazon Prime. I'm getting to the point where I have a decent...

What’s wrong with yours? @Outsane sells 3d printed bushing to bring them back to life. https://solvefunction.com/shop/ols/products/vent-bushing-thing

Some pictures

Dash is almost completely finished - just need to wire the driving lights and reinstall the glove box. Incidentally, this Powerwerx Panel Mount 65W Combo USB-C PD & USB-A Fast Device Charger fits nicely in the place of the stock cigarette...

Thx! The rear doors turned out great, and Julia has been killing it on the vapor barrier restoration: We ended up deleting the factory amp & removing it altogether for simplicity, and I was surprised to find out that the little dash...

The best shock will depend on use Find a shock tuner you like and ask what shock they like to tune. Buy those and have them tune them to your rig and riding style. Shocks are very dependent on driver and style.