Outsane's latest activity

Changed my oil today and it was red, you guys ever seen that before? jk jk it's time to get this transmission out of here. Took off the PDI trans cooler and removed the lines. The cooler is riveted onto a bracket and bolted onto the...

Current state: I haven't had a Land Cruiser build in my life for a couple years and I've missed it. Just ditched my '20 Tacoma 6-speed. Fun to drive but at the end of the day, not a great platform. Test drove everything from PXLs and 200...

Going with a 1hdt for the #Diesel build mated to a h150 transmission 300mm flywheel and a short tranfercase with 3.1 low I am hoping the gearing will be good with 37's.. but not totally sure.. I still need lots of parts,, one of the big...

ZX or XZ badges made

Made our way out to Ouray Colorado for SAS Stayed at our favorite campground in Cider City Sassy our we there yetSpent most of yesterday at the Ouray hot springs 😁 Chilln at the campground this morning

🙆‍♂️ thank you

That's pretty cool, I'll help where I can. I make a bunch of stuff for the 80 series.

Oh cool stuff! Oh cool stuff! All kinds of good things in there!

Nope no text on the light

I wish someone would make the air intake horn for the later model (79+) FJ40 from a 3d printed material. Idgaf if it’s plastic.

I made this one.. I can make one for you

I do have glow in the dark!

I thought it wasn't available any more... please hold until Toyota stops making them

Unless you want the same but have the angle removed at the bottom.

Send it to me and I'll happily make one

Pretty sure it replaces that crustyness

Made from Transparent petg Or glow in the dark

@ofer bruhis gave me one to model from. So now replacement dome light overs are available. If there is anything else you think I should make let me know. https://solvefunction.com/shop/ols/products/40-series-dome-light-cover

Let me know what you find

Excellent product @Outsane however my driver's side is a lot less shakey but still shakey. Passenger side is rock solid. I'm going to pull out the driver's side and check for broken parts and possibly add some neoprene tape for stiffen it up...

Very welcome, thank you for ordering.

Very welcome! Enjoy

Awesome work @Outsane. Thank you! ZX badge next!

https://solvefunction.com/shop/ols/products/toyota-turbo-badge