dogdaysindurham's latest activity
-
dogdaysindurham reacted to 98hundy's post in the thread Media The MUD 100 series Photos thread with
Love.
Always bikes -
dogdaysindurham reacted to authenticdoor's post in the thread Media The MUD 100 series Photos thread with Love.
1999 VX Limited from Japan, 1HD-FTE diesel
-
dogdaysindurham reacted to 100d ua's post in the thread Media The MUD 100 series Photos thread with Love.
Honestly though, who needs a truck when you have a Land Cruiser with 2nd and 3rd row delete?
-
dogdaysindurham reacted to GerLC100's post in the thread Media The MUD 100 series Photos thread with Love.
Just made it this morning! 🥳🥳
-
dogdaysindurham reacted to 98hundy's post in the thread Media The MUD 100 series Photos thread with
Like.
More bikes with some moisture -
dogdaysindurham reacted to george_tlc's post in the thread Anderson powerpole 3D print for 'coin' holders with Like.
The STL files attached for the top and bottom pieces as well as the soldering jig. Top piece looking in. 10-32 bolts that are nominal 0.75" of thread. The 3 'pieces'. The bottom has 10-32 threads for the bolts to thread into. The 3D print...
-
dogdaysindurham reacted to gearinstalls.com's post in the thread Events/Trails Trip Report: Death Valley and a Wrecked 80... with Like.
I am also relieved that no one was hurt....that top(the front pillars)collapsed a lot more than I thought they would. But, in any case, what about the possibilities of a "Project Soft Top"? Cut the top off and have a custom soft top made up...
-
dogdaysindurham reacted to BMThiker's post in the thread Events/Trails Trip Report: Death Valley and a Wrecked 80... with Like.
I just have to comment on the absurd focal length and composition of this shot - it makes it look like your rig was an RC model sitting on the ground behind your wife and dog ;) So glad to hear no one was harmed and that the strength of this...
-
dogdaysindurham reacted to MonkeyProof's post in the thread Events/Trails Trip Report: Death Valley and a Wrecked 80... with Like.
Im glad you found your pup, couldnt sleep all night thinking how that there may not be a chance that you will never see him again. I was the dude that follwowed Luke to the site and helped him get your LC back on all fours, and helped with...
-
Right now at Mammoth Campground getting 150W from my Merlin XP-170 to my Goal Zero 1500X when in full sun. Best part is the air is cool and unlike Moab, NO DUST so windows can remain open.
-
dogdaysindurham reacted to jonheld's post in the thread Oklahoma to Yellowstone and Mount Rushmore with Like.
7600 miles in 2017. Jersey to Cruise Moab to Seattle to Vancouver to Jasper and Banff. Took the Trans-Canada back east and dropped into NY over the St Lawrence. 3600 miles in 2018 from Jersey around the Gaspe peninsula. 4600 miles in 2019 from...
-
dogdaysindurham reacted to xepyt's post in the thread Events/Trails Trip Report: Death Valley and a Wrecked 80... with Like.
Last week my fiancée, puppy, and I headed on our first major trip after overhauling our LC. As the title suggests, the car was totalled- here's the whole story if you're interested... Back in September the startup I was working at went under...
-
Ok, getting back to my original post I have some more thorough results to report. These pics are after a 50km drive last night in the most severe winter driving conditions. I am talking white out conditions with drifting snow and top speeds of...
-
FREE SHIPPING SALE
-
-
Rust repair parts for our geriatric 60s. 60 and 61/62 Rear outer frame crossmembers (60 shown) 60 and 62 Rear shock crossmembers (60 shown) 60/61/62 Rear C-Channels
-
dogdaysindurham reacted to NearJetties's post in the thread Dobinsons 100 Series Suspension options - full breakdown with Like.
Just swapped c59-185s in to replace the c59-167s. The c59-167s were perfect before when I was more stock. C59-167 - 2" lift with stock weight inc 3rd row seat, 1.5" lift with 150-220LBS constant rear weight, linear rate (485/495mm free height...
-
dogdaysindurham reacted to MongooseGA's post in the thread Bottle jack extension adapters. Put your factory jack back to work on lifted vehicles with
Wow.
Your piece of wood sounds more expensive than my rock. -
dogdaysindurham reacted to CanadianRockyCruiser's post in the thread Bottle jack extension adapters. Put your factory jack back to work on lifted vehicles with
Haha.
Your brick sounds more expensive than my piece of wood. -
The Type 1 (Safari Brand) was the old style.... and I believe the CFM rating was low for the 2UZ. Safari came out with an improved flow version called the Armax. Careful when ordering any snorkels. There are like 4-5 different air boxes.
-
They are the Baja Designs flush mount versions mounted in an angled housing to help compensate the angle of ARB bumper that a friend designed and machined at his manufacturing company.
-
I am running the oem snorkel with the cyclone mushroom on my 200. So in my case it wasn’t something I choose since he came with that one in the trunk so for sure I mounted it. Even on dusty and sandy trips (wich for sure are rare where I live...
-
dogdaysindurham replied to the thread Anderson SB120 to XT60.I have had only great customer service experiences with Powerwerx and likely they could make a custom piece you need. In terms of fusing, what is you SB120 currently fused to? I also have an Ecoflow battery (Delta 2). I have their branded...
-
I’m good with paying more (within some limits) for tidier. After all, this isn’t an essential project - just something I want to do to clean up the wiring a bit. Are you talking about this sort of thing? Because I’m not sure if this is tidier...
-
dogdaysindurham replied to the thread Anderson SB120 to XT60.By adjusting the screw it will jammed the smaller wire pretty securely. I can’t recall if I use loctite on my installation but that connection has never given me issues. I used a pair to splice into my 12v puma air compressor power harness to...