Hey guys,
1st post here on my relatively new to me FJ62. She sat for a few years by PO while waiting on parts, career change, injury, covid. I changed the oil, plugs, fuel filter, rotated crank by hand.
I had the fuel pump replaced, tank redone by mechanic. My mechanic was stumped and needs to move vehicles through his shop.
1) I was able to get CEL to produce no codes (flashing). (51 and 11 flashed earlier). replaced TPS - was sticking, calibrated. Charged battery. No codes now.
2) runs fine on starter fluid. One can hear EFI relay and OCR relay kick. Regardless, I jumped (B+,Fp) - cranks but refuses to run.
3) I guess I can pull these relays out and meter them, but is there anything I’m missing unless fuel pump not kicking?
Mechanic said he was able to get fuel to injectors and they were pulsating. Would like to take his word.
Ground? Everything looks factory.
Thoughts??
1st post here on my relatively new to me FJ62. She sat for a few years by PO while waiting on parts, career change, injury, covid. I changed the oil, plugs, fuel filter, rotated crank by hand.
I had the fuel pump replaced, tank redone by mechanic. My mechanic was stumped and needs to move vehicles through his shop.
1) I was able to get CEL to produce no codes (flashing). (51 and 11 flashed earlier). replaced TPS - was sticking, calibrated. Charged battery. No codes now.
2) runs fine on starter fluid. One can hear EFI relay and OCR relay kick. Regardless, I jumped (B+,Fp) - cranks but refuses to run.
3) I guess I can pull these relays out and meter them, but is there anything I’m missing unless fuel pump not kicking?
Mechanic said he was able to get fuel to injectors and they were pulsating. Would like to take his word.
Ground? Everything looks factory.
Thoughts??