Fj80oregon
GOLD Star
So I am gonna pull crank pulley tonight hopefully after kids go to bed. I found a post with a tool mocked up and made one at the shop today to hold the Pulley in place while I attempt to break it loose. Also going to replace seal and oil pump cover. Once again @Wittsend came through with the kit. I have read multiple post and still had a few questions.
1. Does the orientation of the pulley matter when I pull it? I will have to get it lined up with my tool and not sure if I can pull it off or have to have it in a certain position?
2. Do I need to drain oil to replace two said items?
3. Am I forgetting anything?
I picked up a 30 mm 6point socket today and have #3 JES screw tips from @Wittsend. New belts and hoses to replace also.
1. Does the orientation of the pulley matter when I pull it? I will have to get it lined up with my tool and not sure if I can pull it off or have to have it in a certain position?
2. Do I need to drain oil to replace two said items?
3. Am I forgetting anything?
I picked up a 30 mm 6point socket today and have #3 JES screw tips from @Wittsend. New belts and hoses to replace also.