This is too cool!!! Peggy got a bunch of custom steel tube work done I’ve had these designs drawn up for years. When I was finally ready to do it, Mike @ Bump it Offroad @bumpitoffroad (Windsor, Colorado) was happy to take on the project. Both front and rear bumpers are bolt on and all the work was done from scratch. The front does not have space for a winch. I wanted it all very minimal. The front and rear are 1.75” steel tube. The rack frame is 1” steel tube with .5” crossbars @ 4” spacing with lateral reinforcements as well. It’s a flat rack and only goes up to the sunroof. So you can still see ☀The original rear crossmember was cut from the frame and a new steel beam is welded in between the frame rails, where the factory spare tire is located. The gutter mounts are 2 pair of the 120mm mounts from @frontrunneroutfitters. Their company is great to deal with! So is mike from Bump it Off-road, he’s a great guy. You can find his site online or threads on @ih8mud about his work. The accessory mounts are from Baja Rack. Their company is NoT the greatest to work with