FJ40 | BJ40

Classifieds: Toyota 40-series Land Cruiser

Filter by prefix:

1971 FJ40, Fuel Injected 350, SPOA, Roll Cage, 37 inch MTRs, ect!!
Hey guys, I recently bought this rig from Florida. Its sitting in my garage now in Mitchell, Manitoba. I would love to keep it, but don't have enough cash to do so. $6000 obo Engine / Powertrain Rebuilt 5.7L Gm 350 with 85K +/- with stage-1 TBI fuel injection RV Cam Edelbrock performer intake - (All new fel-pro gaskets) Rams-horn exhaust manifold - New Gaskets - Walker crossover exhaust - 2.5" Single exit with 50 series Flowmaster Full billet aluminum pulley system Fabricated aluminum valve covers Replaced long water pump, alternator, power steering pump in last 200 miles PSC power steering lines to Saginaw power steering system New Battery - mounted underneath pass. seat New starter New USA-built Sanderson aluminum racing...
76 FJ40 for sale in Evergreen, Colorado.  No affiliation
Hi All, I spotted this rig in Evergreen yesterday at the Safeway. It has typical Colorado rust, but it is minimal. The rear spring perches are swelling very slightly, but if stopped now will be fine for years. It looks to have a new grill bib with no rust, good doors and decent windscreen frame. The hood is bashed up where a hood ornament was once installed and was obviously bashed into the hood. Overall the rig looks to be very restorable with new tyres/rims but no spare. The fibreglass roof will need some attention and the headlight bezel will need to be flipped before it is test driven. The handbrake assembly was leaking gear oil at a rapid rate of knots.
selling a project vehicle.......... 76 fj40 right now it's a rolling frame with the body on it, powertrain installed. still need lots and lots of work but all the heavy mechanical work has been completed and 90% or more of the parts are there and in new or very good used condition. frame was stripped, cleaned up and powder coated both axles completely rebuilt ARB air lockers front and rear front knuckles completely rebuilt 1990 chevy 350 TBI gone thru new NV4500 all new AA adapter and clutch/flywheel rebuilt transfer case saginaw ps SOA extremely clean tub, already primered and interrior rhino-lined, i have never seen a cleaner un-restored tub than this one. the rear sill is in prefect shape. no rust anywhere...
1976 fj40
very good condition fj40. Has a aluminum tub, new paint, new windshield, and weather striping. lots of new parts. Has siginsaw power steering upgrade. Locker in rear. Original 2F runs strong. The only bad thing is the rain gutter on top is beginning to rust. call or pm if any questions. 9047107223. asking $9200 located in jacksonville FL.
73 fj40 in so,cal. 6,500
SOLD. SOLD SOLD..r ARB locker,arb compressor,orion 4.1 transfer case,clean fj 350chevy /700r4 i have spare tire carrier and 5 matching rims,tires are near new.ths fj drives,steers and stops nice and straight,no rust in tub but has some on front fender.never been crashed or wheeled like it should,mall ,beach and pub crawler 6,500
Greetings, Well my situation has changed over the years, as they often do, and Im itching for a 40. I bought this cherry, one owner 1988 FJ62 back in 2004. Its been garage kept and left stock. Its Red and I did have it repainted a few years ago. I even had an upholstery shop fix the drivers seat tear. 220K on the engine, runs strong, not a single issue my Cruiser-only mechanic can find. I would replace the upper seal as it does have a small leak. No rust except for a small, penny size piece where the rear window and seal meet. All Records on hand. Ive been panicing at the thought of letting this truck go. But my kids are a little older and an FJ40 excites me, something different that I can work on. Im interested in...
1980 FJ40 restified f/s in NC
1980 FJ40, full off-frame resto over last few years. Repainted 653 Olive Brown. 2F H42 long 4 speed, split case, 38K miles on frame/motor (but I don't think I can prove that). Factory p/s, rear full floater with factpry RDB and factory LSD. 4.10 f/r. full OME suspension, all new metal, new Toyota tailights, Toyota turnsignals etc throughout. I planned on keeping this forever. More detail and pictures available. $ 21K obo. Located in Fayetteville, NC.
Stock '78 for V8 auto. NY.
Just curious if anyone out there is interested in trading my 1978 Fj40,2F 4 speed for an equivalent condition Fj40 with a V8 and auto trans. Mine runs great, body has typical rust. Let me know what you have, and if you are close. I think mine is worth in the $5500-$6500 range. More pics available. Thanks. Location Long Island NY. Jeff
Hello everyone, My name is Salim, and i am a new member here at the forum...i was browsing the internet trying to find an FJ40 for sale in the UAE, but haven't found any information...i am seriously interested in purchasing an FJ40 1984. If anyone is interested in selling an FJ40, please let me know..if not, could anyone help me in finding one? Best Regards, Salim
***Thanks for all the help guys. My hunt has ended. Pics posted on this thread**** I'm interested in buying a 76' or newer FJ. Please be interested in selling...at reasonable/market price 30Kplus (I'm ready to buy :-) I don't want to waste anyone's time nor mine. *** Edit*** V8 is a must!! Must have the following: Body restoration (pictures would be helpful) Engine/tranny in top condition Mechanical/electrical in order Hardtop and ambulance doors Beige/white/pueblo brown/olive Would be great if- Has A/C and P/S Thanx fellas- J
1976, fj40 - nc
I will not bore you with some sob story of why I'm selling this 40. Me and the wife just bought a house and it needs work, so I'm trying to free up some cashola. I also just got a great deal on a 99 4runner. We were not planning on getting the house, AND I was never planning on the FJ40 or the 4runner. So the 40 is low man on the totem pole. FJ40 was from Arizona, bought on MUD and sent to NC. Was kind of running when I got it. It is currently in a shop getting quite a bit of work done to it; brakes, axles, bearings, seals, calipers, shoes, electrical work, Power Steering, etc, etc, etc... Yes it is currently in the shop, however I know these things don't sell over night so I'm starting now. Heres some of the old ad: Front tub...
1977 fj40
Sold I have a 1977 FJ40. 4 inch lift and 35 inch tires. Entire body had been covered with bedliner. Minimal rust in tub. Runs and drives like you expect. 4 wheel drive works fine. "Best Top" soft top and doors. I also have a set of half doors. Asking $4500 or best reasonable offer. Can send more pix if needed.
74 fj40  $8500.00
74 fj40 $7500.00 Priced Reduced $7500.00 Well 2012 was a pretty awful year. I find myself needing some cash. So my Cruiser is for sale. As badly as I don't want to do it I have to. In 2008 I stripped it to bare metal and repainted. I have full documentation on this. It has been in my possession since I believe 1998. In 1999 I did the V-8 conversion with TH350, Saginaw P/S and Disc Brakes. It has front and rear Lockrights, Rancho 9000's, Warn 8274, 4 Plus front bumper OME 2 1/2 spring and 1 1/2 shackle lift BFG 35X12.5 M/T Kayline Fast Trac soft top and a bikini top. My baby is not stock it was built to have fun in the mountains. And we did! Everything is in working order it is going to need some TLC...
I have a 1979 Toyota FJ 40 with 85,151 original miles. The body is completely rusted and the frame is questionable. The top is in decent shape with only a few spots of rust. This would be the main item I would look at if buying it for parts. The rear jump seats are also in pretty good shape. I believe the motor is locked up as is it has not ran in close to five years. All the original parts are pretty much there in various conditions. It is currently located near Bunn, NC as I just had to move it. It is also listed on craigslist at http://raleigh.craigslist.org/cto/3492029432.html. Please drop me a line with any questions or offers.
I need to sell or trade my '73 due to our growing family. Lots of work done to it. Has a '75 GM 350 with a 4 speed trans. 6" lift (2" body, 4" spring). Had the leaf springs rebuilt to lower and new shocks installed. Brand new Holly 4barrel 400 series carburetor and starter. Also new battery. Have lots of extra parts via, telescoping mirrors, back seat (no bracket), carpet and liners and bikini top. Soft doors were trashed so salvaged hard door off a '72. Oh and new windshield. Steering linkage has beed beefed up to to 2" steel. Drive shafts extended. Yolk in t-case rebuilt. Definitely needs some cosmetic work and very minimal mechanical left. I have invested aprox $5000 and bought it for $4000. Asking $8500 to offset, but need to...

Thread Filter

Latest posts

Back
Top Bottom