@oakweb - This slipped by you :rofl: - Your welcome.....
I am NOT affiliated with this and it is not mine - but I am in the Boise area visiting family for the week if someone needs eyes on this. $7850
Be the envy of all the snowplow 40's - in fact with a snowplow on the front you'd have the ultimate 40 - and not an inch of diamond plate!
https://boise.craigslist.org/hvo/d/boise-dig-post-holes-or-placer-mine/7409308661.html
FJ40 | BJ40
Classifieds: Toyota 40-series Land Cruiser
Filter by prefix:
1976 Toyota Land Cruiser FJ40
Colombian restored import
POSTING FOR A FRIEND
PLEASE MESSAGE:
sebsal53@gmail.com
for more details
$41000
John Deere Green over tan leather interior
Restored in Colombia in 2017, then imported to the US.
~500 km driven since restoration, may go up slightly but not much
ORIGINAL engine, rebuilt in the restoration. Rest of the vehicle also restored with all OEM aside from a couple things.
Old Man Emu suspension with slight lift, Mickey Thompson wheels and tires (good tread, tires almost brand new with only a couple hundred miles)
Cold AC, heat works great
Car runs great, engine is noticeably very solid.
Suspension is in quality condition.
Interior is beautiful, and the paint job is only a couple hundred...
FWIW Not affiliated
https://boise.craigslist.org/atq/d/boise-restored-upgraded-1972-toyota-fj40/7413958665.html
Found on Facebook in Southern California
$37000
“1978 Toyota Land Cruiser FJ40 all original only 43,989 original miles original sales order when sold new original tool kit and accessories Pictures don’t do it justice please no lowballs no trades”
https://www.facebook.com/marketplace/item/957233028531661/
1974 FJ Cruiser
New paint.
Nice driver quality resto.
Original inline 6 engine.
$24995.00
Mileage is probably not 21k but is actual on title.
Steven or Courtney
410-549-9001
Courtney@carfindersmd.com
$7500. Not mine
https://pueblo.craigslist.org/cto/d/trinidad-1978-toyota-land-cruiser-fj40/7382543153.html
1978 Toyota Landcruiser FJ-40
It has all the desirables: 4sp transmission, 3sp transfer case, barn doors, front disk breaks, rear factory locker.
It has a 400ci Chevy small-block under the hood.
This is a running, driving, licensed truck.
It does have the land-cruiser rust, at one time that was a big deal, now-a- days every panel on the truck is available making the restoration within reach of the typical home mechanic.
Sad to let this awesome father son project go. This cruiser runs and all electrical is working! The odometer worked until I let it sit in the shop for 5 years while I was off at college, so there is an additional 4-5 miles not accounted for. All original minus the rims and mirrors, with minimal rust for its age. We are selling for roughly $12,000.
Not mine:
Accepting offers on 1969 Toyota Land Cruiser. Low value $13,900 high value $77,006. Vehicle does not run, so you will need to tow if purchased. Very little rust on body and frame is in good condition. If interested, please message to arrange a time to see it.
https://www.facebook.com/marketplace/item/1037282207055868/
Log In or Sign Up to View - https://www.facebook.com/marketplace/item/1037282207055868/
What’s something like this worth? says the owner probably got pushed up against a tree on the right side. Has been sitting for 25 years and the front windshield is plexi glass and the frame needs replaced. Motor is not stuck but says the passenger door has plywood in it? Not sure what that means
Log into Facebook - https://www.facebook.com/marketplace/item/2301849083325043/
Hey everyone, I've decided to sell my monster truck. It started life as a 1972 fj40 but has had a lot done to it. I put a new SBC 350 in it 3k miles ago. Installed an electric fan and new radiator and doesnt go above 200 degrees. It has a painless wiring harness. It has a 4 speed 78 Landcruiser transmission mated to the original transferase. Fj60 axels with disks in the front and 40 axels with drums in the back. It has a 4 inch lift and longer shackles as well. It's pretty tall. It runs 35 inch swampers and i have a brand new spare thats never been put on. I did little things to it, like upgrade head lights to CityRacer LEDs, and do the gas strut inside original strut- conversion for lift gate. I have a new set of 80 tie rod...
1974 Toyota fj40, looks to be mostly all factory. i do not have the title also do not have the key. rust on frame and body. i have another steering column with a key i can give you. i am not sure if it runs im sure it needs plenty of work. has pto on transfer case with the shafts going to the front. $3500 firm will posts pictures here shorty. they will not upload
I'm cleaning up my farmyard and looking for a new home for this.
This has been sitting for a few years but was driven daily by my neighbor until I bought it. Thought I might have used it for parts or title for my build but didn't end up needing it.
Currently has no battery. When it was parked it ran but the carb could defintly use some TLC to make it smoother. Fair amount of rust in places. Others pretty solid. I see someone added a full roll cage. Have CO title
Unknown miles
Asking $2,750
Full Fiberglass body in good shape. Tub, bulkhead, fenders, hood, grill all good shape with no cracks or bondo. The rest of the truck is in rough shape, frame has deep rust in places and surface rust on the rest. Full drivetrain is present and should be in good working order, was parked when the engine locked up. Engine is there but questionable if it can be rebuilt. Windshield surround has a few rust holes. Yes I know the bezel is upside down.
$4,500
Any interest? I'm the old guy who's bit off more than he can chew:( I've done a lot of work and spent lots. Here's what's been done so far:
It's down to the frame, sandblasted, 4x4 Labs steering install, suspension mod started SOA, Alcan FJ60 length springs, 5.3 vortec, NV4500, Atlas 2, AdvanceAdapters bell housing clutch etc. FJ60 width Diamond axles w/ARB, 4.88's, boxed rear frame. Cross member built and installed for new drive train.
PM if any interest, thanks
A rare build.... price is right.
All time 4WD with just locking manual hubs.
Come with extra 1uzfe engine with transmssion with only 80k miles. EXTREMELY STABLE at high speeds because of huge center of gravity right in the middle of FJ40.
Check out it. Make me an offer. Can't go wrong with this one.
Clean title, Registered and in current tags.
I am selling jump seats, and to be completely honest I am not sure what year they'll fit in...
I am willing to send any requested pictures of them.
They have been re done, and there are no rips in them.
Along with not being to knowledgeable on them, but I can negotiate on price whatever it is.
The back need a little bit of TLC, no rust, just scratches.
Not mine, no knowledge of the people or rig, but would help a fellow Mudder out by taking a closer look if needed.
Asking $25k/OBO...
1973 FJ40 Landcruiser. $9800.00
I bought this beast in 2007 and began changing and improving, it was rough.
What it’s got now:
Aluminum 4 core radiator/transmission cooler with braided stainless An lines.
SMI Racing Q-jet, braided stainless An fuel lines with inline fuel filter and pressure regulator.
Lokar shifter
New exhaust
Completely rebuilt front axle and differential converted to disk brakes
Onboard air with York compressor. Mounted an airtank off of a pancake compressor up under the rear tub. System has a coalescing filter on it to knock out some of the fluids.
Professionally rebuilt brake booster.
Double gun rack between the seats
Best Top soft top, full soft doors and bikini top.
Custom bulletproof front bumper/winch...
No affiliation and I am shocked that the writer of the ad has assumed the gender of this rig. I thought that was not allowed? Doesn't the rig have to decide it's own gender?
https://chicago.craigslist.org/nch/ctd/d/kenilworth-1971-toyota-fj40/7383782428.html
Lot's of changes in the past 6 months with new job, relocating and building a new house and so it's time to move on and my 40 needs a new home. I'm out of town right now and don't have my personal PC with pictures, but you can check some of my build threads on 'mud (and my content) to get an idea of my work. If you're inclined she'll do 80 mph down the freeway straight as an arrow. This is NOT a 'project', it's ready for the Rubicon or Fordyce today. I'll have pictures soon. But, here are the basics:
5.3LS
Headers and dual exhaust, no crossover pipe in the front
Custom Radiator mount and aluminum fan shroud
Howell EFI harness and reprogrammed PCM (Programmed for the current power train configuration, everything else is deleted so you...
The link I included to Craigslist has more pics and a full description/ write up.
Thanks for looking
I have a Part # 712532 Advance Adapter Bellhousing W plate for a 1974-1980 FJ40 4SPD Trans will fit 327-350 motor $ cost 396.82 $350.00 plus ship Thx Buz
