Windshield installation parts for a 2020 lc200. (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

7000ft

SILVER Star
Joined
Oct 23, 2020
Threads
51
Messages
422
Location
Flagstaff,AZ
I'm planning on replacing my pitted and chipped windshield in my 2020 LC200 here in the very near future.
Does anyone here have the installation kit parts numbers?
I'm purchasing the windshield from toyotaparts.com but they are not familiar with it enough to tell me what I need for the installation kit. Thanks in advance for your help!
 
Last edited:
In the above diagram you'll need the rubber moulding across the top, and the small strip on the bottom left above the VIN tag. Some installers want the "stoppers" but others wont.

Generally you'll need other parts that are in different diagrams though. The moulding strips along the sides of the windshield often can't be reused, so those are good to have.
Right 75533-60082
Left 75534-60072
8 total of the clips that hold those on 75548-60021
The FSM says the rivets that attach those clips need replaced, but that's not necessary on this platform.
The top of that side moulding is retained by a different clip, 2x 75561-60031 Some techs can reuse these, but they do get too bent sometimes.
 
In the above diagram you'll need the rubber moulding across the top, and the small strip on the bottom left above the VIN tag. Some installers want the "stoppers" but others wont.

Generally you'll need other parts that are in different diagrams though. The moulding strips along the sides of the windshield often can't be reused, so those are good to have.
Right 75533-60082
Left 75534-60072
8 total of the clips that hold those on 75548-60021
The FSM says the rivets that attach those clips need replaced, but that's not necessary on this platform.
The top of that side moulding is retained by a different clip, 2x 75561-60031 Some techs can reuse these, but they do get too bent sometimes.
I appreciate the great write-up details. Thank you!
 
This is what my parts list looks like. I also am thinking of ordering 56117-60100 which is the dam glass adhesive

Screenshot 2025-05-30 at 11.09.00 PM.png
 
I had that part on hand but my tech didn’t use it. He said it wasn’t needed when there was an existing bead of adhesive that they cut to remove the old panel.

It isn’t super expensive though.. in case a tech did want it.
 
I had that part on hand but my tech didn’t use it. He said it wasn’t needed when there was an existing bead of adhesive that they cut to remove the old panel.

It isn’t super expensive though.. in case a tech did want it.
Awesome thanks for the guidance!
 

Users who are viewing this thread

Back
Top Bottom