Windshield frame grommets (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 6, 2011
Threads
226
Messages
2,393
Location
Woodstock,GA
Looking for some grommets for my 1974 FJ40 windshield frame where the wiper motor wire comes through. There are two of one size on top of the windshield frame on the drivers side and the other size is on the enter side on the drivers side as well. If anyone has a part number or where I could get them would be great. Thanks
F4DBAAAC-59C2-4747-944F-E3A5E6E23F69.jpeg
C70D39DF-51DB-4F35-B961-53816D0CE32E.jpeg
22859527-2AA3-4249-9363-AA93DE491A3F.jpeg
 
 
Thanks! I looked at there site earlier. I must have missed it.
 
I went to a local hardware store with measurements and got some that worked great. About $1.50 for all 3.
 
I don’t and I’m out of town for a couple days but if no one else answers I can measure when I get home.
 
There’s this one too:

 
Thanks! I did think about them as well. Just didn’t take the time to navigate through there site. They are a 45 min drive for me.
 
There’s this one too:

Thanks! I just found out yesterday that there was that part yesterday as well and noticed it today on there site. I noticed today I still had the original one that’s in decent shape.
 
Alright, the two smaller ones at the top (for courtesy light wire I think) are 3/8” od with 3/16” id for 1/16” thickness.
The bottom where all the harness wires come in is 1/2” od with 3/8” id for 1/16” thickness. I’d get one with a little larger od for this one; maybe 5/8”?
image.jpg
3858ADFC-38E4-4F97-8C24-96FAB6E52B4B.jpeg
062CD852-CD87-4B66-AE03-5C361DDA3945.jpeg
 
Bought the two smaller grommets from Toyota and the larger one from Grainger. I also cut a slit in the larger one to look like OEM. Thanks for the help everyone.

794B665C-68EC-4237-A287-1FC270059336.jpeg


0E104E71-7AE4-4ADA-96A0-5321ABF4D84E.jpeg
 

Users who are viewing this thread

Back
Top Bottom