Correct. As you lift the caster moves negative.thanks man. that’s great. that’s showing positive caster i guess. and negative caste is what you get when you lift i guess...
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Correct. As you lift the caster moves negative.thanks man. that’s great. that’s showing positive caster i guess. and negative caste is what you get when you lift i guess...
THANK YOU. i’ll print these out.How to measure castor?
I've don't recall seeing THIS aspect of castor/alignment covered before so here we go. When my OME was installed with CC the alignment report said I was at 3 deg. pos. It drove fine and still does. I had the alignment checked because of crazy tire wear recently and everything was fine, except...forum.ih8mud.com
Where to measure caster with angle finder
I have truly searched, but the keywords I have used versus the number of hits is tiresome. With an angle finder, is there a quick location to get a preliminary caster degree measurement? '93 FZJ80 Thanks, Tyforum.ih8mud.com
That number post lift will help identify the correction method and amount you need. I ran around 0* for a little while, no harm (IHMO), just makes the truck a little "darty" until addressed.THANK YOU retrofive!
That number post lift will help identify the correction method and amount you need. I ran around 0* for a little while, no harm (IHMO), just makes the truck a little "darty" until addressed.