What have you done to your 200 Series this week? (26 Viewers)

[TioChachie]

Went to a locally owned and ran exhaust shop today. I'm ready to address the stock unit that hangs low below my rear high clearance bumper (which is not attached in this photo). View attachment 1165113
Anywho - any exhaust experts in here want to kick some knowledge my way on what I might ask for? Stainless - ok
Muffler - or not?
Thanks

When I cut off my resonator for my 4x4 labs bumper on my 80 I lost one or two exhaust mounts. I would recommend if that happens with your 200, that your stress to the muffler shop that you need your exhaust to be attached very strongly if possible.

On my 80, the first set of replaced exhaust hangers broke at the welds and I got a rattle upon start up that scared me on a road trip until I figured out what it was. You know the toyota factory exhaust is bombproof, so don't let them just tack it back up there.

For the 80, they put on a little exhaust tip that does fine for the 1fz-fe, I look forward to seeing the solution on the 5.7.

 

[Desert Nomad]

For that last end on the rear there aren't any mounts for it, (actually 2 mounts are there) a simple cut and pipe won't affect the rest of the exhaust in any way. I'll try to get a clear picture when I'm get to my cruiser. Only one i found on the phone

 

[Willy beamin]

ok - thanks
might tuck it up a bit more than stock location seeing how I lots of room under there with the spare tire cavity not in use. Please post up a pic when you get the chance. Shop owner said the same about skipping a resonator and just utilizing a straight pipe - I asked him to think about it over the weekend and see what he comes up with.
thanks

 

[Desert Nomad]

ok - thanks
might tuck it up a bit more than stock location seeing how I lots of room under there with the spare tire cavity not in use. Please post up a pic when you get the chance. Shop owner said the same about skipping a resonator and just utilizing a straight pipe - I asked him to think about it over the weekend and see what he comes up with.
thanks

Sorry, after sticking my head under the cruiser there are 2 hangers holding up the rear end

 

[RTaylor]

I've had this setup for almost six months. No change in the exhaust tone or drone.

 

[Willy beamin]

Thank you kind sirs

 

[Willy beamin]

Did this "mod" this weekend

 

[arich]

Another set of TRDs done by ProFormance for my buddy Chris.
Stormtrooper look.

 

[Markuson]

Another set of TRDs done by ProFormance for my buddy Chris.
Stormtrooper look.
View attachment 1167108
View attachment 1167109

Looks very interesting.
How about posting a close-up of just the tire/wheel?
Kinda hard to see your handiwork in these shots because detail is lost in the darkness.
Would love a close look.

 

[Markuson]

Did this "mod" this weekendView attachment 1165839

What did you do?

 

[Willy beamin]

the factor 55 link in the rear - its the red thing

 

[arich]

 

[Markuson]

View attachment 1167113

Wow! Looks awesome! I like that you left the lugs and ring screws alone.

Is that paint? Or Powder coat?

 

[arich]

Powdercoat.

 

[Willy beamin]

Looks great - did you dip those tires in soul glo?

 

[arich]

Jerri Curl

 

[codyaustin5]

Looks great - did you dip those tires in soul glo?

If you could only hear my Eddie Murphy impersonation on TRD wheels....

 

[arich]

Forgot to mention he has Radflo 2.5s and we installed 1.25" spidertrax spacers which is why it appears so wide. It does rub on mudflaps at full lock.

 

[blackoutz]

Installed a Front Runner Rack this past week while I'm waiting for all my parts to come in. Love it so far. Can't wait to order some accessories. Couple pics of mt brother ride too. He is rocking 22's and they look amazing.

 

[blackoutz]