What have you done to your 100 Series this week? (36 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Worked on transferring this swing out from a 1st gen 4Runner to work on the cruiser. Lots of small projects to make this work but it's coming along! Will be easy to pull on and off the spindle so I don't have to drive around town with it on all the time. Thanks to my buddy and leftover metal I'm only at $50 for the latch and some hardware!

IMG_1002.jpeg


IMG_0997.jpeg
 
FamilyCamper said:
Worked on transferring this swing out from a 1st gen 4Runner to work on the cruiser. Lots of small projects to make this work but it's coming along! Will be easy to pull on and off the spindle so I don't have to drive around town with it on all the time. Thanks to my buddy and leftover metal I'm only at $50 for the latch and some hardware!

View attachment 3641853

View attachment 3641854
Click to expand...
Cool project. I highly recommend a gusset under that spindle. Your tire weight is no joke.
 
MechE30 said:
Cool project. I highly recommend a gusset under that spindle. Your tire weight is no joke.
Click to expand...
Thank you! the second I swung it out I thought the exact same thing. I added two gussets on either side of the spindle for holding it up. Also for others wondering, I threaded an m12 up into the spindle from the bottom to give it extra support as it does not extend through and have a classic/stronger double shear. Will post some more pics once its finished.
 
Not to dog pile, but it also doesn't look like you have much penetration on the welds into that plate. I would maybe rethink that design. Few miles of vibration on that thin plate and I'd hate to see it shear off on the road in front of someone.
 
Trunk Monkey said:
Not to dog pile, but it also doesn't look like you have much penetration on the welds into that plate. I would maybe rethink that design. Few miles of vibration on that thin plate and I'd hate to see it shear off on the road in front of someone.
Click to expand...
All good I appreciate the feedback. I submit my beginner welding skills to comment when I post them up. I did two passes around each of the sections here so the second pass is more raised up. The two holes in the main plate will get M12 bolts going through the bumper in case the welds do break off.
 
Got the Slee tray and a second battery installed, still need to wire it up before moving on to the other electronics. Winch, lights, radio, and a power panel in the rear are on the short list. Cruisers on the Rockies is serving as great motivation to knock out some long-standing projects.

PXL_20240527_194348404.MP.jpg
 
JAntosch said:
Sound deadener in the doors and back, re-covered the speaker and sub grills, and installed Morel Maximo Ultra 602's and Kicker sub. Huge reduction in road noise and improvement in sound quality!
View attachment 3641985View attachment 3641983
View attachment 3641984
Old JBL's are up for grabs here: FREE - SLC, UT: '04 100 Series Speakers (4x JBL 602, Pyle Sub) - https://forum.ih8mud.com/threads/slc-ut-04-100-series-speakers-4x-jbl-602-pyle-sub.1339551/

Now to figure out how to put a second battery where the rear AC is....
Click to expand...
What's going on with those struts on the quarter windows?
 
You must log in or register to reply here.

Similar threads

modus
What parts do you recommend replacing on a 260K miles 100 series?
Replies
12
Views
1K
cbbr
cbbr
C
What mods do you regret on your 100 series?
4 5 6
Replies
100
Views
18K
Exiled
Exiled
huuunnnt
What is the 100 Series stock ride height?
Replies
9
Views
1K
Manhattan
Manhattan
harpersferry100
Having my fuel tank dropped, while it's out, what else to replace?
Replies
9
Views
842
OEMGUY0720
OEMGUY0720

Users who are viewing this thread

Total: 37 (members: 6, guests: 31)

Share this page

Back
Top Bottom