My kid got in there and pulled about $1 worth of change out. Also found 2 pearls and a diamond stud!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
My kid got in there and pulled about $1 worth of change out. Also found 2 pearls and a diamond stud!
Upgraded tires to 285/75r16 on stock 16 wheels after the suspension upgrade (ironman foam cell pro+ SPC UPC). After the project i don't think i will need a aftermarket wheels as i like the look.
@TRAIL TAILOR Front diff drop installed. Best part is I didn't have to alter my ASFIR skid plate in any way. Used the Trail Tailor bolts supplied with the kit for the skid plate. Did not use the skid plate spacers.
View attachment 2860318View attachment 2860319View attachment 2860320
I know I need it for the occasional rock crawling I do. Not in the budget at the moment, but definitely on my future mods list. The mods never end haha.It looks like you are ready to have some fun off-roading or whatever you want to do. I did exactly the same thing with my TT drop diff and Asfir. No spacers. No regrets.
My skid plate takes a serious beating over rocks. Depending on how hard you are planning to wheel, the TT creeper skid works well.
I understand Jason just made up a few creeper skids for the 100 series. @TRAIL TAILOR
View attachment 2860393
Why I Traded My 190,000-Mile E39 BMW M5 for a 190,000-Mile Lexus LX470
On a value basis, it probably isn't my best deal. But on a quality of life basis, it's a hall-of-famer.www.roadandtrack.com
Those front seat lifters, which product are those on their site ? link would be nice. This would solve my low seat height !I want to add two features to my Land Cruiser:
- Disable ABS
I plan on doing this by interrupting EXI2 to the ABS-ECU and connecting this input to GND.
- Override the Low Range shift pattern
I plan on doing this by interrupting the L4 switch to the Transmission ECU and connecting this input to GND.
Did not test if this works yet, but figured I'll start by engraving a switch:
View attachment 2857174
Don't mind me switching D & N...
Also Installed Seat Jackers from Desert Does It, I like these things.
View attachment 2857186
Before and after pics..trialling a mates wheelset with a different offset and while i love the look of the new wheels and tyres, they do stick out quite a lot meaning i will need flares, which i really wanted to avoid. But if i like them enough i guess i will go down that route. For legality reasons and also to avoid throwing stones up into the paintwork
View attachment 2861262
View attachment 2861263
View attachment 2861264
Those front seat lifters, which product are those on their site ? link would be nice. This would solve my low seat height !
Thanks for sharing. Definitely, something to keep an eye on.We’ll I’m getting fast at hub work. After replacing RF steering knuckle and bearings I decided to replace the RF bearings with koyo/Toyota, assuming they were Timkens like I found on the left.
Got it apart and noticed that bearings have spun previously on this spindle too (it actually looks worse than the left one!)….did not notice this when I repacked them a month ago. So I buttoned everything back up and ordered another knuckle.
Makes it feel like less of a wallet blow to order the two knuckles separately, so I guess that’s the silver lining…..
View attachment 2862758
Love my Bugout 130! Curious if the BCDC gives you any read out on solar production?Anderson Powerpole day. Wired up my Redarc BCDC to connect my Overland Solar Bugout 130 solar panel.
And cut into our new National Luna NL 50 fridge DC cord to put on a Powepole to connect to the dedicated fridge wiring that runs from the aux fuse panel to the back.
View attachment 2863207
View attachment 2863208
View attachment 2863209
View attachment 2863210