I also have 2inch lift without a diffdrop. Leaked grease soon after the lift. Then a mechanic did one side and I did the other by myself. Both holding well over 10-15k miles, not much offered/flexing though. May be yours overtightened, that can easily happen with aftermarket tighteners
What have you done to your 100 Series this week? (92 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I also have 2inch lift without a diffdrop. Leaked grease soon after the lift. Then a mechanic did one side and I did the other by myself. Both holding well over 10-15k miles, not much offered/flexing though. May be yours overtightened, that can easily happen with aftermarket tighteners
It ripped straight in the center not on the clamp. Almost like it was hyper extended or something.
Could be bad luck with a faulty boot or something hit it on highway, sorry to hear that. Don't think its a over flex given you have a diff-drop.
Hmmm, now you have me thinking. Maybe I hit some debris like some downed branches or something on the trail. Most of the trailing I do is on trails that dont get much activity and end up overgrowing. Thanks for the feedback.
Before the smoke got bad, drove to Sullivan Lake, here in NE Washington for a 15 mile hike up/down the mountain in the background. Took a pic of the 99 LC from the summit of Hall Mountain, but it is just a dot...
Used the Partsouq parts catalog to order heater T's, hoses, etc. ( like the part diagrams/pictures, good prices, even with shipping from Dubai, UAE):
Yesterday, joined the rear-shock-hole club to install Bilsteins. Also, since the smoke is now extremely bad, donned the respirator to change out the heater T's. Here's my comfy engine cushion and old rickety ladder. Glad I did, one OEM-original (185K miles) tee was disintegrating (pictured) and the other broke apart in my hand during disassembly:
Used the Partsouq parts catalog to order heater T's, hoses, etc. ( like the part diagrams/pictures, good prices, even with shipping from Dubai, UAE):
Yesterday, joined the rear-shock-hole club to install Bilsteins. Also, since the smoke is now extremely bad, donned the respirator to change out the heater T's. Here's my comfy engine cushion and old rickety ladder. Glad I did, one OEM-original (185K miles) tee was disintegrating (pictured) and the other broke apart in my hand during disassembly:
What was your rig's mileage at the time of replacement @silver02accord ? Did you feel any indications that it was time for a survey or were you playing a hunch?
Cheers mate,
G
Just dropped $400 on parts to replace my timing belt, water pump, fan bracket and other items on the front of the engine. I'm at 203k and suspect they're all original.
06 with 212k miles. I have been baselining so just getting a lot of stuff out of the way plan on keeping truck for a long time (always wanted a 100). Here is a pic of thr one coil that def needed replacing, this was #7 at back of engine bay ds. The spark plug was also loosest on this and coil 5. The plugs were changed 90k miles ago with oem and looked weathered too - gaps were 0.43-0.46What was your rig's mileage at the time of replacement @silver02accord ? Did you feel any indications that it was time for a survey or were you playing a hunch?
Cheers mate,
G
Replaced the antenna with one from AntennaMastsRus.
And got the new wheels and tires this week. Had to do some Orange County Choopers style “fabrication” to get the front center caps on.
And got the new wheels and tires this week. Had to do some Orange County Choopers style “fabrication” to get the front center caps on.
Hit by a semi and flipped.
Bought the swing outs. Dual tire carrier for when I pull the trailer. Then tray for rest.
Link for the antenna and how do you like it so far? I guess I mean in terms of reception, even thought I hardly use the radio.
Did you unplug the antenna motor from the fender or underneath the glovebox?
That color is great
Spent last couple days installing ARB Sahara bumper (plain Jane w/no buffer or bar) and Smittybilt XRC 9500 lb winch. No room under bumper for control box so mounted it on top. Bumper install more tedious than complicated. This forum much more helpful than included instructions.
Few hours on the trail today but no need to test the winch.
Shot in the dark, but can anyone measure their stock height 100/lx470 front wheel gap (Without lift)? Would like a fender to center of wheel cap measurement (or whatever is best) so I can use as reference to see where my lift is sitting at.
trdcorolla
SILVER Star
19.5" is the factory height
My notes say 19.75 Front (20.5 Rear) but I’ve been wrong before. AHC though if that matters.
Didn’t do it myself, but hidden winch and out carrier. Do need to figure out what to do with my license plate now. Any ideas??
What, how?
Jesus, from center of cap? Then i'm at a 3" lift up front LOL.
