What have you done to your 100 Series this week? (112 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
fireball
SILVER Star
I finally removed the stock running boards today after owning my LC for 2 1/2 months. They are free to any local Mud member.
Before
And just finished this tonight. All factory functions work.
And just finished this tonight. All factory functions work.
@geanes can't say enough good things about this bumper. I went out to CA to have Ben install it about a month ago and I have been getting compliments in parking lots and gas stations ever since. I think the combination of aesthetic and function is top of class. I wouldn't hesitate at all at pulling the trigger. Looks like you are on the HIH7 thread. I'll be going - if you are as well - come find me if you want to see it in person!
Details on the pearl job?
Man, I wish I were going to HIH this year. Definitely signing up for 2018. I bought my 98 LX just this past March and didn't discover HIH until too late
Added MetalTech sliders in May and just put on the Gamiviti rack last month when I went up to CO. Headed up there again in August to hit Great Sand Dunes, Gunnison and loop down to Ouray/Silverton to hit the big passes. I was debating between the TJM T13 and the Dissent (with bullbar like yours). But, I've settled on the Dissent (best looking bumper by far). Your setup is exactly like I want with the bullet leds and 3x3s. I'd have it ordered already, but had to get new tires for the rig (swapping out the TerraGrapplers 285/65/18 for the KO2s 275/70/18.....got a screw in 2 of the tires where DiscountTire won't repair).
I couldn't figure this out man but looks so cool. Please share what are the slots for.
More info on this please! Nice!
Put some new shoes on for the HIH7 dance. Wondering if i should pull the steps off next.
So I used the products from automotivetouchups.com. The pearl is a three step process which I was very worried about. Prep and patience is definitely the key to good results. Overall three coats of primer, three coats base coat, three coats of mid coat and three coats of clear. If I ever do it again, I'd skip the primer product and just use rustoleum. I used the rustoleum on the center section of the bumper and it required zero sanding, had great coverage and layer down perfect. The finished product looks identical to the one wing I've got done. Their primer requires sanding....not even an option.
Oh and started my rims today too. One at a time....it'll be slow and my truck gonna look weird for a while LOL.
Dropped a 3" of 3/8" clear vinyl tubing in the transfer case. I gave up after 10+ hours of trying to dig out.
The vinyl is stuck two inches directly under the fill hole. Unless God's performing miracles I have to drop it.
Open to ideas for those who have 'em ...
The vinyl is stuck two inches directly under the fill hole. Unless God's performing miracles I have to drop it.
Open to ideas for those who have 'em ...
kelly saad
Supporting Vendor
Do you have one of those expanding clamp grabber thinggys? It has a button on the back, really thin and flexable. Might work.
kelly saad
Supporting Vendor
Had to get new tires. My old ones were gashed and torn. Cranked my T bars a little and installed my heavy rear coils to pull the tent trailer to HIH. Also, installed the new trailer brake control.
That looks fantastic! Great job. I would love to see something like that in my '05.
Yes, the 'mechanical fingers' play didn't work. They're too long - I need something that'll drop down immediately after getting into the TC.
Thanks!
Exactly what color I was thinking for my LC wheels, nice choice!
