Better is relative, but my biased opinion is "Yes it does."
Everyone else is practically asleep on the morning commute, but not you. Nope. You're watching for the apex, looking ahead to plan your braking, carrying speed through corners and down...
It's been a while, not many crazy updates but figure I'd post!
ARB Combo 2003+ Installed with ARB LED Fog Lights
Bilstein B8 5160's
Dobinson's Adjustable Rear Control Arms (Upper and Lower)
Rebuilt Swing Out Spindles.
2700K Interior LED's
35L...
My E-brake is talking to me...
When I purchased my 40 the E-brake was adjusted waaaaaay loose to the point it wasnt functuoning. I adjusted it back where it should be but when driving you could hear the brake scraping/rubbing when you come to...
Thanks guys, i believe i got everything ordered correctly!
OEM front rotors, calipers, pads and shims for a 2005 Tundra v8.
CVJ for front axles (oem units no longer available) 9168 TR - CVJ Axles - https://www.cvjreman.com/product/9168-tr/
and...
@Rics4rnr @YotaFun Can you guys please help me out with the tundra brake upgrade parts? It seems there's some conflicting information out there and I want to make sure to order all the correct bits and pieces!
I am still debating 32s vs 33s...
Well, after two years of sitting outside I brought my truck into the shop and my plan is to start ramping up on finishing my engine swap.
My goal is to drive it out to Rubithon this year…. Crossing fingers…
Thanks for this excellent tutorial… I feel like I’m ready to go full power into the dash cluster if I should ever develop any instrument problems….
Dealt with a 30A / 50A gauge swap that took a little bit of reverse engineering…. I just hope I...
Gauges - 2nd time's a charm! Getting the Temp & Fuel gauge working again on the 40! And lets not forget that oil pressure gauge.
After cleaning the connections on the circuit board last time the fuel & temp gauge started working again....for a...
Time to tweak a OCD issue...Or should I say "CDO"...OCD alphabetized like it should be lol.
The rig drives straight and hands off but the wheel is slightly crooked and it drives me crazy. Linkage looks close to correct so I corrected the issue...
Thanks for the help everyone, you pushed me in the right direction.
OEM parts ordered: steering rack, LCAs, LBJs, flange bolts, TREs, cam bolts and a fancy new shift knob.
from OPT OFF ROAD: forged ball joint sway bar end links, and the...
Was wondering about this truck the other day. I'm pretty sure @TRFCSUX sent pics of mine after the lift but I went with 5100's and 883/891s. I did OEM LBJs with ARP hardware from Anonymous Fab and @eimkeith 's PCK as well. Sitting on 285/70/17...
@YotaFun, @Rics4rnr - many thanks for your quick reply!
I will definitely add the LBJs and LCAs to the list. I assume both of these OEM is the best option? I did already purchase the Icon stage 2 kit 96-02 4RUNNER 0-3 -...
So at 40 mph you have a full tank, good cooling and a charge to the battery but no oil pressure? 😳
Sorry, I hope you have a sense of humor…It was just sitting there waiting for a comment
Hodaka Pops and I out running errands this weekend in the FJ.
Original 12v emergency work light that cane wirh the FJ. It plugs into a socket in the glove box and is long enough to reach under the rig and into the engine bay. Way cool...
Hello all!
I know we have a few other club members who own 3rd gens and I wanted to say hello and ask for some help. Just picked this truck up all the way out in CO, it's got just over 200k miles, 5 spd with e-locker and in pretty decent...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.