If everyone needs were the same it would be a boring world. I glad you found what works for your needs and shared with others.
What have you done to your 100 Series this week? (31 Viewers)
- Thread starter SHUSH
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
sammybones
Study in Moppishness
Decided to get some sand under our feet and scout out some new spots.
Replaced my front door lock actuator motors. First one took way longer than it should have . Next one went pretty quick only hold up was getting the clamshell open, but once that was done it went smooth it's great to hear the locks hammer open and close
Removed the old cloth speaker fabric and sprayed the grill's black.
Intended to do all new u-joints this weekend. Was sent the wrong parts for the front DS but the truck drives ok as RWD for the moment. Had a s*** ton of trouble getting the old joints out of the rear. Corrosion! Likely won't completely solve my 1200-1600RPM "growl" but it has helped. Flats on the trunions can't be good for vibration!
Thinking motor/diff mount bushings may be the next part of the growl story.
Nice new Matsuba joints.
Thinking motor/diff mount bushings may be the next part of the growl story.
Nice new Matsuba joints.
Tow the boat to the lake and will be leaving Tuesday for Mexico the two main reason we purchased it.
Data point - Just figured my MPG for pulling the boat to the lake 9MPG
When I consider I got 13 pulling the same boat to the same lake using our Dodge Cummins 4WD 
![IMG_9556[1].JPG](https://forum.ih8mud.com/attachments/img_9556-1-jpg.1477233/ "IMG_9556[1].JPG")
Data point - Just figured my MPG for pulling the boat to the lake 9MPG
When I consider I got 13 pulling the same boat to the same lake using our Dodge Cummins 4WD
Last edited:
CB install:
Cobra 75WXST
Firestik 4' on hood mount (cable routed through factory antenna mount into AM/FM/CB splitter)
LCP mudguard delete:
Cobra 75WXST
Firestik 4' on hood mount (cable routed through factory antenna mount into AM/FM/CB splitter)
LCP mudguard delete:
DIY quick fist and maxtrax mounts on factory cross bars using Yakima horizontal mounts:
And then did one of these over the weekend:
And then did one of these over the weekend:
Plasti-dip'd the wheels this weekend. Turned out a lot better than I thought it would. Will see how well it actually holds up to the elements and trails.
5 coats of Anthracite grey and 2 top coats of glossifier.
5 coats of Anthracite grey and 2 top coats of glossifier.
Removed the old cloth speaker fabric and sprayed the grill's black.
Go get a can of the Camo paint (I picked mine up at Wally World). One of the shades of tan is a dead on match. I'll take a pic of mine when i get a chance.
@LandCruiserPhil what suspension and tire set up are you running? Stock gears? And how does the 100 handle the extra weight? Sorry for all the questions
AHC suspension
275-70/18 Nitto TG2
Stock gears
I run air bags and have them dialed in to the AHC to handle the 5000# of towing and maintaining a great wife approved ride
Took my Hundy to a Vermont endurance race. Slept in it Saturday night. Carried hay on the roof cuz I'm expo af.
Then on Sunday I got my ass handed to me by my amazing little Arabian, who yanked on the reins for miles and worked me so hard I can hardly walk today.
Then on Sunday I got my ass handed to me by my amazing little Arabian, who yanked on the reins for miles and worked me so hard I can hardly walk today.
Looks great!
So do you have a 2007 with 16" wheels or an earlier model with a front end update?
I also have an 02. Swapped em.
