What do you want for your cruiser that you cant not get?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

A woman that is willing to polish it
 
And the cruiser too!
 
-Darth Vader helmet light (a.k.a soft top courtesy light)
-pocket inspection light
-new OE replica bolts - recessed head, captured washers, the whole 9
-full wiring harnesses (especially for later model Cruisers)
-15x8, 16x7 and/or 16x8 wheels that can fit stock hubcaps
-fuse block covers
-a lot of the old Conferr stuff - fold and tumble seat, storage box for between the frame rails (I don't need it, just think it would be cool if it was still available), etc.
-OE reinforcement bracket for stock bumper to carry winch
-OE center console
-reproduction OE center console that's lockable (Tuffy style - I think I saw someone on MUD do this - very cool)
-later FJ40 factory p/s return line
-HAI shield that mounts on exhaust pipe (plus an aftermarket one that mounts on headers)
-Barn doors that fit later model tubs
-Tailgates that look OE (i.e. recessed instead of flat sheet)
 
A crankshaft and crank pulley for a 2F :crybaby: Had a crankshaft lined up, lost his email address. Had a pulley lined up, guy ended up having issues with is own and needed to hang onto it. :bang:
 
subzali said:
-Darth Vader helmet light (a.k.a soft top courtesy light)
-pocket inspection light
-new OE replica bolts - recessed head, captured washers, the whole 9
-full wiring harnesses (especially for later model Cruisers)
-15x8, 16x7 and/or 16x8 wheels that can fit stock hubcaps
-fuse block covers
-a lot of the old Conferr stuff - fold and tumble seat, storage box for between the frame rails (I don't need it, just think it would be cool if it was still available), etc.
-OE reinforcement bracket for stock bumper to carry winch
-OE center console
-reproduction OE center console that's lockable (Tuffy style - I think I saw someone on MUD do this - very cool)
-later FJ40 factory p/s return line
-HAI shield that mounts on exhaust pipe (plus an aftermarket one that mounts on headers)
-Barn doors that fit later model tubs
-Tailgates that look OE (i.e. recessed instead of flat sheet)
Click to expand...
I think you can get a few of those things. :hhmm:
 
maybe but they sure aren't items you see every day. At least I don't.
 
If you're interested in an OE console, I have a mint one I'm looking to unload in favor of a Tuffy.
 
Not going to read thru the whole thread but was the latch for the barn doors mentioned? I know it seems at the very least the knob you pull up to release the pin is gone. Not sure who made it but I have the whole setup I bought from a little vender in Oregon that could be used as sample. Pretty sure there is a market for these. I've never checked but believe I read where they are no longer available from Toyota.
 
Living in the Past said:
Not going to read thru the whole thread but was the latch for the barn doors mentioned? I know it seems at the very least the knob you pull up to release the pin is gone. Not sure who made it but I have the whole setup I bought from a little vender in Oregon that could be used as sample. Pretty sure there is a market for these. I've never checked but believe I read where they are no longer available from Toyota.
Click to expand...

Isnt someone making a reproduction? Thought I saw them somewhere.
 
I am trying to coordinate a vintage ARB repro that looks like this.

I will update with details as I get them.
attachment-1.webp
 
majojo4 said:
Isnt someone making a reproduction? Thought I saw them somewhere.
Click to expand...

By the primer red paint they look like other items I seen from Ehsan in Pakistan. If that is where they are coming from not sure when more would be available. If anyone knows of another source I would like to know. Up into 63 the hard top models require two, one for each door. So just for two cruisers I could use four.
 
Living in the Past said:
By the primer red paint they look like other items I seen from Ehsan in Pakistan. If that is where they are coming from not sure when more would be available. If anyone knows of another source I would like to know. Up into 63 the hard top models require two, one for each door. So just for two cruisers I could use four.
Click to expand...

I know I saw some a couple months back somewhere on MUD that were new, clear zinc plated. I looked for it today and couldnt find it. HMMMM.....I will keep looking.
 
All the 10, 11, 12 and 14mm sockets that seem to dissapear every time I work on the cruiser:grinpimp:
 
phrogg4evr said:
All the 10, 11, 12 and 14mm sockets that seem to dissapear every time I work on the cruiser:grinpimp:
Click to expand...

Yep no Joke, I now have a ton of extra sizes of 13, 15 amongst others, cause the only place that Is open at 1 am is wal mart, and for some reason they dont sell single wrenches/sockets..
 
You must log in or register to reply here.

Similar threads

C
  • Question Question
What tools do you keep in your FJ40?
2 3
Replies
42
Views
4K
65swb45
65swb45
Mark Jennings
Do you service your Distributer
2
Replies
22
Views
2K
Pighead
Pighead
msapers
My proposed Dash Layout. What say you?
Replies
5
Views
725
msapers
msapers
miker
What wheels are you using for 37x12.50 tires on a FJ40?
Replies
15
Views
1K
bikersmurf
bikersmurf

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Share this page

Back
Top Bottom