Is that one of your piles?
What did you work on tonight? (2 Viewers)
- Thread starter Dumpolina
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Just finished replacing wheel cylinders, front calipers, and master cylinder on Dad's truck that I inherited last year.
Mauser
Supporting Vendor
My dad got me a laser engraver for my birthday. Have been playing around with it a little bit. Did this for my bros that were killed last year. I know its a little crooked, this is a lower that I screwed up machining. Just a test piece.
Tank5
SILVER Star
Last night I finished building a new winch mount for the trailer.
I also built this roller set to protect the end of the trailer and lift my project over the edge of the trailer when winching.
Added and engine hoist to to the kit and built a heavy duty skid to pick a half full 500 gallon propane tank for the house. I am tired of being held up by the contract tank company I have had in place.
I also built this roller set to protect the end of the trailer and lift my project over the edge of the trailer when winching.
Added and engine hoist to to the kit and built a heavy duty skid to pick a half full 500 gallon propane tank for the house. I am tired of being held up by the contract tank company I have had in place.
That's really cool Virgil
alia176
SILVER Star
a full 500g tank? Dang, that's like 4lbs x 500 = 2,000 lbs + 200lbs for tank = 2200 lbs
. You ain't messing around Hause. Love the rollers, good job.
NMBound
SILVER Star
It's about damn time...5% tint all around and a 12V fridge.
I also got the ARB screen porch enclosure for the awning.
Looking to get back out there for extended periods again.
I also got the ARB screen porch enclosure for the awning.
Looking to get back out there for extended periods again.
Last edited:
Tank5
SILVER Star
Making the news was definitely on my mind. I worked slow and drove slow to avoid any mistakes.That's so cool, well done! Good job not making the news, too!
I should add that I tried to buy a refurbished tank from two different companies that stood me on the delivery date. I don’t understand how they run a business this way. I opted not waste my time on them anymore and do it myself. This is how I ended up doing this job on my own.
Hopefully the company coming to install and fill it follows through. If not, it may get more interesting.
Mauser
Supporting Vendor
The best way to haul a full or partially full propane tank and get the D.O.T types to leave you alone is to use some stencils and paint ANHYDROUS AMMONIA on the side. Nobody wants to mess with that stuff.Making the news was definitely on my mind. I worked slow and drove slow to avoid any mistakes.
I should add that I tried to buy a refurbished tank from two different companies that stood me on the delivery date. I don’t understand how they run a business this way. I opted not waste my time on them anymore and do it myself. This is how I ended up doing this job on my own.
Hopefully the company coming to install and fill it follows through. If not, it may get more interesting.
NMBound
SILVER Star
I suppose this will have to do for now. I did melt wire mesh into it.
alia176
SILVER Star
Might be time for a new front axle 
Mauser
Supporting Vendor
Can it be welded?Might be time for a new front axle
View attachment 3728397View attachment 3728398View attachment 3728399
alia176
SILVER Star
I'm sure it can be welded but will it be like polishing a turd? I won't know until I pull it out then inspect it closely. This is just metal fatigue which is to expected from two decades of wheeling. As a backup, I should keep an eye out for a replacement housing that I can modify/improve, then switch everything over.
alia176
SILVER Star
when it rains, it pours. Isabelle's 3rd gen 3.4 just blew the head gasket
Any damage?when it rains, it pours. Isabelle's 3rd gen 3.4 just blew the head gasket
alia176
SILVER Star
I hope not as she recognized something was wrong and parked at work quickly. I drove it yesterday, after filling the radiator with water for about one block. Radiator got pressurized something fierce. Opened up the cap, and saw volcanic eruptions and steam coming out of the exhaust pipe .
Mauser
Supporting Vendor
I made a few of these. I'll be giving them away. If I make it to the breakfast on Saturday I'll hand out what I have. Nothing fancy, they are fake leather, but I did add velcro to the back.
