What Did You Do with Your 80 This Weekend? (38 Viewers)

[duece71]

I got the Slee 2” tow hitch receiver mounted up on the OEM bumper. The 2 top bolts included are M12-1.25 and utilize the threaded portion inside the bumper with a fixed nut inside. The bottom 2 bolts included are 1/2-20 and come with washers and lock washers. The bolts were a bit too short so I went to Lowe’s and got longer bolts (3” vs 2”) and the new bolts worked great. The receiver hangs down a little lower due to the rear bumper step lip. Very study for the intended use which is the trailer hitch bike rack.

 

[Kabanstva]

I got the Slee 2” tow hitch receiver mounted up on the OEM bumper. The 2 top bolts included are M12-1.25 and utilize the threaded portion inside the bumper with a fixed nut inside. The bottom 2 bolts included are 1/2-20 and come with washers and lock washers. The bolts were a bit too short so I went to Lowe’s and got longer bolts (3” vs 2”) and the new bolts worked great. The receiver hangs down a little lower due to the rear bumper step lip. Very study for the intended use which is the trailer hitch bike rack.

View attachment 3577878

View attachment 3577879

View attachment 3577880

View attachment 3577881

View attachment 3577882

i like the color matching bicycle.

 

[duece71]

i like the color matching bicycle.

Haha, yeah, I can use the touch up paint for both cruiser and bike now.

 

[GORDA91]

Rear sway bar and end link bushings

 

[cruzinfj1]

@PrydeFall Tomorrow Ill pull it out and take some more pics. The antennae even works!!!!!!

 

[COYS]

 

[Fj80oregon]

@PrydeFall Tomorrow Ill pull it out and take some more pics. The antennae even works!!!!!!


View attachment 3578112

View attachment 3578113

Semper fi!

 

[Fj80oregon]

Picked up a 97 not blown up for once. 270k running and driving excellent before it was yanked.

 

[spensert5]

Rotors, pads and a preload check with quality control manager

 

[bonestock]

@landtank casterplates.

 

[FloridaCruiser22]

Just went and explored for a few hours

 

[Trigger6]

Picked up a 97 not blown up for once. 270k running and driving excellent before it was yanked.

View attachment 3578235

View attachment 3578237

and a nice view of the PHH in the 1st photo for those wanting to know the location.... (I'm currently in the process of tackling that project right now... unfortunately for me, my engine is not on an engine stand.)

 

[77mustard40]

Finished my tie and relay rod upgrade, the old tie rod was bent and the tie rod ends were shot so I splurged for the DeltaVS rods. Attended to a few other small items as well. Can’t wait to get her dirty next week.

 

[JoeCova]

Finished my tie and relay rod upgrade, the old tie rod was bent and the tie rod ends were shot so I splurged for the DeltaVS rods. Attended to a few other small items as well. Can’t wait to get her dirty next week.

View attachment 3578439

Interesting that Delta retains the factory clamp instead of a jam nut

 

[leonard_nemoy]

Interesting that Delta retains the factory clamp instead of a jam nut

All that matters is the name badge

 

[77mustard40]

Interesting that Delta retains the factory clamp instead of a jam nut

They are machined down on the end to accommodate the clamp. Beefy mothers and lighter than what came out, which surprised me given the thickness.

 

[stuntheavy]

Haven’t been able to play for weeks, but I finally had time to let it eat!

 

[Azca]

Haven’t been able to play for weeks, but I finally had time to let it eat!

View attachment 3578488

View attachment 3578489

Yes, but did you get over that without winching??? Forgetting the name of the trail and obstacle.

 

[OffRoadScott]

Haven’t been able to play for weeks, but I finally had time to let it eat!

View attachment 3578488

View attachment 3578489

Great pictures. The line to the drivers left looks easier, but what does it look like after that? Where/What trail is this?

 

[cruzinfj1]

Haven’t been able to play for weeks, but I finally had time to let it eat!

View attachment 3578488

View attachment 3578489

Great lookin rig!!! What wheel and tire combo is that?