Glad it was the simple fix! I was really feeling for you with your issues lately and the frustrations!
What Did You Do with Your 80 This Weekend? (46 Viewers)
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Glad it was the simple fix! I was really feeling for you with your issues lately and the frustrations!
Went home over lunch and picked up my very own rollover protection system (RPS).
Removed A442F transmission to find the one clutch pack in very bad shape.
Referred to as C02 in service manual,rear clutch on Toyodiy and others call it the direct drive clutches.
Either way if you turbo your 1FZFE and increase you power by 100% expect this to happen to your transmission
So what happens is you loose 3rd, O/D and reverse.
So the fix is.....
Buy new clutches and clutch plates.
Order Extreme Valve body from Wholesale Automatics and the lock-up kit while you in there.
Transmission is currently dismantled awaiting parts.
Referred to as C02 in service manual,rear clutch on Toyodiy and others call it the direct drive clutches.
Either way if you turbo your 1FZFE and increase you power by 100% expect this to happen to your transmission
So what happens is you loose 3rd, O/D and reverse.
So the fix is.....
Buy new clutches and clutch plates.
Order Extreme Valve body from Wholesale Automatics and the lock-up kit while you in there.
Transmission is currently dismantled awaiting parts.
Last edited:
You are correct sir - 8 clicks is what is in the FSM (and what I did, I mistyped stating 8 turns.) Still WAY too much. I found @RavenTai's directions to be the most helpful. I landed I think 1-2 clicks off touching/dragging.
Negative on the lift, and honestly the insides of the drums looked really good, other than very dusty. I replaced the rotors because the braking surface (for the calipers) was pitting, so brand new rotors - no worry of a lip. And no brake fluid anywhere. I should have taken a pic, ya'll wouldn't have believed how good the insides look. East coasters would have been jealous of the absolute absence of any rust or corrosion, I didnt have to use a single drop of WD-40 or PB blaster.
Last edited:
Strange, I love using my 80 to haul my clubs to the golf course to play golf. Doesn't suck at all
Strange, I love using my 80 to haul my clubs to the golf course to play golf. Doesn't suck at all
A golf course is a sad waste of a rifle range.
Combine the sports, and you might pique my interest.
Ordering materials today. Ill keep you posted
i admit, I'd like blast that ball with .40 s/w sometimes!
LS1FJ40
SILVER Star
Ordering materials today. Ill keep you posted
I dig it!
surfpig
The Anti-Tech
surfpig
The Anti-Tech
The "wall"
LS1FJ40
SILVER Star
you can't blame that on Iowa rust!
Oh definitely. It's probably good for another 15 horsepower....each
Actually, one of them is claimed by another local member. I may or may not have pushed him off the ledge to buy one.
I think I've said that exact thing before!
surfpig
The Anti-Tech
And when I'm too crippled to do anything else, maybe I'll take up golf.
More likely, I'll just take a really long walk in the desert.
Yupp, screw work. At the lake level was OK but at 10k elevation on sunday was craaaaazy. ATTACH=full]1225851[/ATTACH]
surfpig
The Anti-Tech
YUPThe "wall"
Mandatory 5 foot cornice for the drop-in right now. Or you can negotiate the rocks...
YIKES
Warranty replacement for my BFG AT KO2s
New KM2s hit mud within 10 miles of being mounted.
New KM2s hit mud within 10 miles of being mounted.
