TLC Norway
woodwelder
That's an awesome picture with the trailer!! Can you flash the rear/front lights?
Good luck on the move!
What did you do with your 60 this weekend? (32 Viewers)
- Thread starter MrMoMo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Good luck on the move!
When I had the 60 front end on, yes, I could turn them on. Now since I swapped front ends, it's not wired to yet. Below is an older picture.
Captain Sanuk
WAMPA
I shot a video. nothing special just some messing around
http://www.ebay.com/itm/141598742801?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
here is a link to the ones that i bought
here is a link to the ones that i bought
RodrigzCrzr
SILVER Star
Got really upset at the Honyok who side swiped my cruiser at the Home Depot and didn't leave a note!
ARRGGG!!!
ARRGGG!!!
That stinks!
Bear Lake Cruiser
SILVER Star
A holes
Bear Lake Cruiser
SILVER Star
A few years ago I went to the grocery store 7 am. I was the only vehicle in a 5 acre parking lot. I came out and right rear corner smashed in and bumper dislodged. Light was hanging by the wires. No one around. To this day I don't understand. I guess you can't fix stupid
Ugh... So sorry to see that! I'm always going out of my way to park as far away as I can from anyone else... Inevitably with multiple spaces to the left and right I'll return to find someone parked right up against me... A good 3M rubbing compound may make it less of an eye sore until you can get around to fixing.
RodrigzCrzr
SILVER Star
I was parked way at the end and away!
Still like you said someone still right up against me!
Yes I will rub it out till I fix it.
So rather then stewing about it . I went to my local Toyota dealer and purchased a brand new fuel pump for my 84 Fj60 project. It eased the frustration and kept me busy!
Still like you said someone still right up against me!
Yes I will rub it out till I fix it.
So rather then stewing about it . I went to my local Toyota dealer and purchased a brand new fuel pump for my 84 Fj60 project. It eased the frustration and kept me busy!
RodrigzCrzr
SILVER Star
Old versus new!
Cleaned the surface really well.
Viola nice new shiny fuel pump installed.
You did put the spacer in, right?
RodrigzCrzr
SILVER Star
Yes I did, bought that and two gaskets
2 gaskets? Front and back of spacer?Yes I did, bought that and two gaskets
RodrigzCrzr
SILVER Star
Yes. I ordered all that was shown on the computer!
I figured might as well!
I figured might as well!
Put in a can of refrigerant for the AC. The AC will freeze your ass right out of the cruiser now. Gonna hang some meat and furs in there. Dead gangsters...
Went shopping for everything I need for the BIG UPCOMING PROJECT!
H55F and associated peripheral parts from beno. You will not beat his price.
Got a t-case rebuild kit coming from Valley Hybrids.
Got a clutch kit and some other goodies coming from Cruiser Outfitters.
Picked up a big jug of purple power cleaner and a metric butt-load of shop towels at Wallyworld.
Ordered several Permatex products and a few tools, on the way Amazon prime.
Gonna install the 5-spd, rebuild the t-case, install all new clutch parts, have flywheel resurfaced, replace leaky rear seal and oil pan + side cover gaskets. Also have a totally new OEM exhaust from cat back including all the stock hangers to fix leaky exhaust from prev owner, also from beno. Will prob do a pic thread in and start install in 2 weeks.
I have a very cool buddy with a full shop who will let me work there, we will call him "hippie Randall". He is an ace mechanic, body man, and painter. He rebuilds Acuras and Hondas, drives a Cummins Ram, and rolls his eyes at my 2F saying, "Dude. Pull out that piece of crap and lets put a SBC in there, mannnnnn". If I need help I will just struggle until he can't stand it, and pushes me out of the way, saying "You are doing it wrong! Here. Let me show you".
So I got that going on for me.
Went shopping for everything I need for the BIG UPCOMING PROJECT!
H55F and associated peripheral parts from beno. You will not beat his price.
Got a t-case rebuild kit coming from Valley Hybrids.
Got a clutch kit and some other goodies coming from Cruiser Outfitters.
Picked up a big jug of purple power cleaner and a metric butt-load of shop towels at Wallyworld.
Ordered several Permatex products and a few tools, on the way Amazon prime.
Gonna install the 5-spd, rebuild the t-case, install all new clutch parts, have flywheel resurfaced, replace leaky rear seal and oil pan + side cover gaskets. Also have a totally new OEM exhaust from cat back including all the stock hangers to fix leaky exhaust from prev owner, also from beno. Will prob do a pic thread in and start install in 2 weeks.
I have a very cool buddy with a full shop who will let me work there, we will call him "hippie Randall". He is an ace mechanic, body man, and painter. He rebuilds Acuras and Hondas, drives a Cummins Ram, and rolls his eyes at my 2F saying, "Dude. Pull out that piece of crap and lets put a SBC in there, mannnnnn". If I need help I will just struggle until he can't stand it, and pushes me out of the way, saying "You are doing it wrong! Here. Let me show you".
So I got that going on for me.
Last edited:
Just checking. I'm told the sky falls if you forget that.Yes I did, bought that and two gaskets
RodrigzCrzr
SILVER Star
Yeah I never heard of any such problems when not installing that spacer. and I don't want know first hand!Just checking. I'm told the sky falls if you forget that.
Might be time to get a side cover gasket too.
It's looking kinda gunky around that pump.
