Bought it, then drove it 1800 miles in about 40 hours. Ordered new shocks, wheels and tires.
What did you do with your 60 this weekend? (44 Viewers)
- Thread starter MrMoMo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
sheepdawg
Champagne appetite. Beer income.
Installed a new head gasket after my other blew.
Fj moneypit
Cubic Zirconia Member
Drove it! After replacing water pump, fan clutch, fan, hoses, belts etc.
- Joined
- Jun 21, 2011
- Threads
- 230
- Messages
- 21,732
- Location
- Redding, California
- Website
- trail-tailor.com
Mounted the curved light bar.
J
J
Started the engine in my 1uz lexus v8 swap. Replaced a bad coil on it and then replaced that same coil with a good one. Sound's good with open manifolds.
tore the dash apart. Now I know why everything creeks. 25 year old plastic is brittle.
I always thought the 1uz was a natural swap into the 60. Looking forward to the final product
- Joined
- Oct 14, 2013
- Threads
- 22
- Messages
- 164
- Location
- Prescott Valley, AZ
- Website
- www.aroundthehouseaz.com
Not the weekend but...Replaced my power steering pump and tomorrow gonna change the front brakes.
I have wrist surgery on the 18th so its gonna be a while longer.
Loaded it up with 4 other friends and a ton of gear and went to Yosemite for a three day weekend. This year's trip was the 25th annual for the De Anza College Outdoor Club. The weather was better than expected, but I swear this club is cursed by rain. (it's rained on ever trip/event I've done with the club) Ate an epic Sunday buffet brunch at the Ahwahnee hotel, (the club paid for half of the club officers bills; half off made it taste even better!).
Went out to trim some trees with my roofracks on Mt Provost, Cowichan Valley, BC. Found some awesome trails, lots of flexing, crawling down steep riverbeds and some sandy hill climbs. Mt Provost has some old mining history, there's a large clay pit and numerous mine shafts along the way
Also re-installed my newly rebuilt double cardan driveshaft
These speakers are a pretty nice perk when working underneath the rig
These speakers are a pretty nice perk when working underneath the rig
Looks good, we were there just before I left and it was covered in snow. I guess west coast winter is over!
So keep all the part numbers for the universals you used on the drive shafts. Was it true that there were two different
sizes per end?
Last edited:
Ya I wrote them down and kept the receipt for next time....
no they were all the same.... one was definitely harder to get, but it eventually popped in. I cleaned all those parts like crazy to make my life easier when rebuilding.
I have a feeling the other sources may have a had a light layer of rust or something in their sleeves that hard formed with the previous ujoints....hence why the old caps went on perfectly fine.
Looks like it is getting parked for a bit. Front axle is leaking, got a bearing(engine) making noise. Rack needs some loving. Bunch of stuff. Might, might, be back with a V8 and ARB's front and rear. We will see.........Alaska trip was a bit of a bitch.
- Joined
- Jun 21, 2011
- Threads
- 230
- Messages
- 21,732
- Location
- Redding, California
- Website
- trail-tailor.com
Got the light bar wires run from the rack, through a drilled hole, down the d-pillar and routed up to the dash area.
WHEW!!...
J
WHEW!!...
J
Fresh coat of paint
Finished custom aluminum rack and installed 50" led bar to front of truck and 24" to back of rack
Took a ride through the Madison Valley over to Virginia City.
Today my valentine gave me a kitchen pass for the first half of the day So I rebuilt both bellcranks, derusted my drums and painted them black!
I tore into my brakes to completely redo all rear brake system but the bits inside looked brand new! So I did some cleaning and ensured that the cylinders were functioning then put it all back together. I was hoping now that the Ebrakes work that my brakes would function better. Unfortunately that is just not the case, I bled everything. And the brakes do work a bit better but not like I think they should.... This was the only photo I took so I'm posting it
