I added a new light on the tail gate to brighten up the area that gets used as the "kitchen counter" when we go camping. Light is a surface mount LED from superbrightled.com. Should make finding a beer in the cooler after dark easier. 
What did you do with your 60 this weekend? (23 Viewers)
- Thread starter MrMoMo
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
What are the part numbers for the products you ordered?
I added a new light on the tail gate to brighten up the area that gets used as the "kitchen counter" when we go camping. Light is a surface mount LED from superbrightled.com. Should make finding a beer in the cooler after dark easier.
The switch is just a 12v radio shack switch. The light is this one.
It's not quite a "flush mount" as there is a rectangle that protrudes about 1/4 inch below the outer rim (you can see it in the picture of the back f the light where the wires come out) so I just made a little pad for the light to sit on. That way I only needed to drill 5 holes in the tailgate (actually just in the plate that covers the electric lock actuator).
sschruff
Make PSILOCYBIN legal for TBI/PTSD/TRA&D
They might be spoken for already but if not, I'll offer them up on MUD for free (but with a hitch - I'll pick a number [1-100] and whoever guesses it, gets it, plus postage of course, lol).
Shane
Wrapped the steering wheel in parracord.
- Joined
- Jun 21, 2011
- Threads
- 230
- Messages
- 21,735
- Location
- Redding, California
- Website
- trail-tailor.com
Opened packages of goodies and then sealed them back up for later installation...
J
J
sschruff
Make PSILOCYBIN legal for TBI/PTSD/TRA&D
sschruff
Make PSILOCYBIN legal for TBI/PTSD/TRA&D
Used mine as a 'range vehicle' today - with only the driver's seat, no panels, no carpet, all door panel hardware removed, no radio, no shift knobs, no headlights. . .almost like being inside a gen1 death can.
maat
yeah nah maybe
haha imagine the poor ploice officer when he stops you for something and sees that.. stripped car, bulk guns and ammo, ready for the end of the world.. FBI is now tracking you bro
sschruff
Make PSILOCYBIN legal for TBI/PTSD/TRA&D
lol. . .wayyyyy past that point. The LWRC just arrived today (or the stamp did, weapon was sitting in my shop's safe for 9 mo, 3 wks, 4 days). Remind me to tell you a story when I got pulled over and "....Jesus, you always carry that many weapons with you. . ." came out of the PO's mouth in the first 60 secs. Cheers. . .
Shane
It took 6hrs and 2 big ass blisters. I was making sure it was on tight.
Glad I'm not the only one who does that.
- Joined
- Jun 21, 2011
- Threads
- 230
- Messages
- 21,735
- Location
- Redding, California
- Website
- trail-tailor.com
Got a carpet kit off eBay to make a template out of for future kits I plan on making and wanted to make sure it was all there. Stockpiling parts is the calm before the STORM for me. HA!
J
J
gregnash
Anal Retentive Analyst
This!!.... Have a load of parts coming from @beno and @orangefj45.... This will be going to the knuckle rebuild which will then allow fore new tires and hopefully that will open up enough time to do my Monstaliner paint job this summer. Also debating on putting in sound deadener or something else? Really need to have the tint redone (PO got 3/4 of the truck done, passenger side doors arent finished) and would love to build myself some sliders just for $h1t$ and giggles.
Star Pictures!
2 AR's and a box of zip locks is hardly TEOTWAWKI status, but it's a good start...
sschruff
Make PSILOCYBIN legal for TBI/PTSD/TRA&D
I'll be sure to grab a shot of the 3N3 GunPOD, AR/M4, and KR50 cases next time around
Happy Easter,
Placed back in service the now clean steel coolant lines that attach to the block and changed the old burst coolant hoses with fresh ones from Napa. It took a little work to cut and fit from the selection they had, but alas - new hoses on board. Cleaned up and put new hose clamps on the 3 old ones entering the firewall/heater core too.
X'd my fingers as I fired "Flower" up and found ZERO, as in NO, ZILCH leaks coming from ANY coolant lines after a thermostat rebuild a couple weeks ago.
Added coolant per excellent "burping" instructions found here and drove "Flower" around for a while up some steep hills here in the Bothell, Wash. area. Temp gauge reads DEAD CENTER and heat is starting to eminate from the vents!!!
With another "burping" and coolant added, I feel I can start to get that heat SOOOOO longed for and SOOOOO neglected in getting.
James
Placed back in service the now clean steel coolant lines that attach to the block and changed the old burst coolant hoses with fresh ones from Napa. It took a little work to cut and fit from the selection they had, but alas - new hoses on board. Cleaned up and put new hose clamps on the 3 old ones entering the firewall/heater core too.
X'd my fingers as I fired "Flower" up and found ZERO, as in NO, ZILCH leaks coming from ANY coolant lines after a thermostat rebuild a couple weeks ago.
Added coolant per excellent "burping" instructions found here and drove "Flower" around for a while up some steep hills here in the Bothell, Wash. area. Temp gauge reads DEAD CENTER and heat is starting to eminate from the vents!!!
With another "burping" and coolant added, I feel I can start to get that heat SOOOOO longed for and SOOOOO neglected in getting.
James
Took it to the lake for some Easter barbeque and egg hunt.
Thought I was getting a roof top tent for my birthday to take her camping up the flinders ranges this weekend. Got this instead
