What size you running on the AT III's?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
actually looks alright! Which suspension under there?Installed 5th gen T4R Predator steps to make in the interim while it’s daily duty for the kiddos.
View attachment 2564181
Check out Kaon 4x4 for their steel replacement. It’s very nice...10-minute upgrade today. Finally got all the hardware for the back door handle replacement and followed the directions here.
View attachment 2560675
As you can see, next up is doing something about the sad net.
actually looks alright! Which suspension under there?
5 and 7 yr olds here
New video by Mark Weissinger
photos.app.goo.gl
victory 4x4 tooCheck out Kaon 4x4 for their steel replacement. It’s very nice...
Thanks! Mine are 10 & 7. The steps bolt right up with the same holes the OEM steps uses, and I was able to pick up a used set for ~$200. Suspension is OME medium duty kit (886&895 springs IIRC) and their Nitrocharger shocks. I’ve got the Metaltech stage 2 rear coil conversion also. Gave me a pickup of about 2-2.5”. And I also went with the JBA UCA’s and a set of Spidertrax 1.25” spacersactually looks alright! Which suspension under there?
5 and 7 yr olds here
New video by Mark Weissinger
photos.app.goo.gl
These are 255/80r17What size you running on the AT III's?
How’s the 886 ride? Do you have the hub to fender measurement? I’m debating between 885 or 886.Thanks! Mine are 10 & 7. The steps bolt right up with the same holes the OEM steps uses, and I was able to pick up a used set for ~$200. Suspension is OME medium duty kit (886&895 springs IIRC) and their Nitrocharger shocks. I’ve got the Metaltech stage 2 rear coil conversion also. Gave me a pickup of about 2-2.5”. And I also went with the JBA UCA’s and a set of Spidertrax 1.25” spacers
View attachment 2564400
View attachment 2564402
How’s the 886 ride? Do you have the hub to fender measurement? I’m debating between 885 or 886.
Thanks for that. I think the 886 will be better suited for the V8.Hub to fender is around 22.5”
Where did you get the door handles?I ordered the outside door handles and replaced the chrome ones on my 2009. I also removed the rear chrome strip from the rear glass.
I will eventually get rid of the chrome factory roof rack , black out the grill, emblems and rear door chrome.
I'll probably paint the door belt chrome moldings since they are brand new ( replaced by Lexus during the paint recall).
I temporally swapped the wheels and tires from my 3rd gen 4Runner, planning a ski trip to Colorado, my Icon lift and tires will not be here in time.
View attachment 2566274View attachment 2566276View attachment 2566278
View attachment 2566274
View attachment 2566276
View attachment 2566278
View attachment 2566274
View attachment 2566276
View attachment 2566278
Those caps look great! Where did you find them?Blacked out grill and emblems, added LRD center caps.
View attachment 2566286
View attachment 2566287
I ordered the handles from the Lexus dealer. You have to match your color code with a 2003-2007 GX.Where did you get the door handles?
That looks great!Installed the prospeed rack over the weekend. Great price especially if you can get it during a GB or Black Friday sale. Fit and finish are excellent and it looks to be 1/2" lower than the competitors.
View attachment 2568038
Thanks! 285/70/17 on 2.5" liftThat looks great!
Is that lifted on 265/70/17's?