Thanks Mark. So anyone brave enough? Haha. I don’t care about the rear, but the cargo area and fronts would be great. I’d be curious what “a little” trimming looks like
80 Series Weathertech Floormat fit 60 series?
forum.ih8mud.com
Weathertech Floor Mats ????
- Thread starter bluehawk
- Start date
-
- Tags
- floor floor mats mats weathertech
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hojack
♠️Project Snowball❄️
Here’s the 80s series Weathertech floormats in a 62 series.
Here’s a cut to fit Weathertech floor mat option.
This option was just under $55 for both fronts and rear. Anybody use this set?
Here’s a cut to fit Weathertech floor mat option.
This option was just under $55 for both fronts and rear. Anybody use this set?
i had the cut to fit in my 60. They were ok, but not like the floor liners. I think I could live with the 80 ones. I’ll buy those and see how it goes. I took out the foot rest.
Hojack
♠️Project Snowball❄️
Were you going to get the 80s rear seat floor mat?
No, I only need the fronts. Kids are gone, so back seat won’t get used much. Would like the cargo area though.
Thank you for the pictures. I ordered the fronts, We'll see how they "really fit" lol. I am wondering if needed I can take the heat gun and relax them a little. Its going to take me a while to get the interior back together, but I'll keep everyone posted.
Thank you for the pictures. I ordered the fronts, We'll see how they "really fit" lol. I am wondering if needed I can take the heat gun and relax them a little. Its going to take me a while to get the interior back together, but I'll keep everyone posted.
“Massaged” these molded mats into place today, i think we have a winner boys
Please ignore the suicide clutch pedal and general lack of cleanliness - just got the truck back and need to detail it this weekend
Please ignore the suicide clutch pedal and general lack of cleanliness - just got the truck back and need to detail it this weekend
Where did you get those
rhah
Admit it, your cruisers jealous
Nevermind picture says Husky liners
Right, but which Huskey liners?
Finally have some time for a proper writeup for these Mats now that I’ve used them for the better part of three weeks.
I spent a while looking at early Toyota trucks with floorpans similar to our cruisers. After a while I narrowed it down to early pickups and first gen 4Runners based on some photos.
Then I looked for any company claiming to make molded mats for early Pickups / 4Runners - as you may imagine that list is so small it’s almost non-existent. It turns out the trick to finding it was to select “Pickup” instead of specific model
Thankfully Husky does make a set in both grey and back - and their website shows pictures of their actual products. With this in mind I could see it was pretty close to what I wanted - raised lips on the edges, and a stepped design on the floor, so I took a gamble and bought some.
The end result is shown below.
Pros: These Mats are durable and are definitely just as good as any weather tech product I’ve owned in my other vehicles, the bottoms have large spikes so they don’t move at all, and the design captures water instead of slowly draining it onto your carpet
Cons: These are designed as molded mats, not trim to fit - however for our purposes here trimming them works to our advantage without ruining their functionality.
The image with red markup is directly from husky, and shows the specific mats you get. The red marks are 90% accurate to where I needed to trim to get them to fit my truck. You will need a heavyduty pair of shears with cutting blades to do this
Note: There wasn’t anything I trimmed that ruined the “pan” of the Mat - only some high edges that had some unnecessary overlap that cause my map pockets on my doors to bump.
Some here might balk at the idea of trimming mats you pay 75 bucks for, which is understandable. However, the finished product is the best solution I’ve had in ages
Husky Mat 35002 / 35001
www.huskyliners.com
I spent a while looking at early Toyota trucks with floorpans similar to our cruisers. After a while I narrowed it down to early pickups and first gen 4Runners based on some photos.
Then I looked for any company claiming to make molded mats for early Pickups / 4Runners - as you may imagine that list is so small it’s almost non-existent. It turns out the trick to finding it was to select “Pickup” instead of specific model
Thankfully Husky does make a set in both grey and back - and their website shows pictures of their actual products. With this in mind I could see it was pretty close to what I wanted - raised lips on the edges, and a stepped design on the floor, so I took a gamble and bought some.
The end result is shown below.
Pros: These Mats are durable and are definitely just as good as any weather tech product I’ve owned in my other vehicles, the bottoms have large spikes so they don’t move at all, and the design captures water instead of slowly draining it onto your carpet
Cons: These are designed as molded mats, not trim to fit - however for our purposes here trimming them works to our advantage without ruining their functionality.
The image with red markup is directly from husky, and shows the specific mats you get. The red marks are 90% accurate to where I needed to trim to get them to fit my truck. You will need a heavyduty pair of shears with cutting blades to do this
Note: There wasn’t anything I trimmed that ruined the “pan” of the Mat - only some high edges that had some unnecessary overlap that cause my map pockets on my doors to bump.
Some here might balk at the idea of trimming mats you pay 75 bucks for, which is understandable. However, the finished product is the best solution I’ve had in ages
Husky Mat 35002 / 35001
Classic Style Laser Cut Fitted Floor Mats | Husky Liners
Classic cars need the ultimate protection. Use laser cut fitted floor mats from Husky Liners that mold to the dimensions of your car, leaving nothing to chance.
Last edited:
When I go there they cost $97 (US website). I wonder if this is from cookies that adjust pricing based on your history. Tdot Performance in Canada has them for $130 CDN.
I should have added this link instead, Amazon is your friend my good man. The trick is to search by the part number when you jump on Amazon
Husky Liners Fits 1990-95 Toyota...
Amazon product ASIN B000CMKE6Q
Last edited:
Finally have some time for a proper writeup for these Mats now that I’ve used them for the better part of three weeks.
I spent a while looking at early Toyota trucks with floorpans similar to our cruisers. After a while I narrowed it down to early pickups and first gen 4Runners based on some photos.
Then I looked for any company claiming to make molded mats for early Pickups / 4Runners - as you may imagine that list is so small it’s almost non-existent. Thankfully Husky does make a set in both grey and back - and their website shows pictures of their actual products. With this in mind I could see it was pretty close to what I wanted - raised lips on the edges, and a stepped design on the floor, so I took a gamble and bought some.
The end result is shown below.
Pros: These Mats are durable and are definitely just as good as any weather tech product I’ve owned in my other vehicles, the bottoms have large spikes so they don’t move at all, and the design captures water instead of slowly draining it onto your carpet
Cons: These are designed as molded mats, not trim to fit - however for our purposes here trimming them works to our advantage without ruining their functionality.
The image with red markup is directly from husky, and shows the specific mats you get. The red marks are 90% accurate to where I needed to trim to get them to fit my truck. You will need a heavyduty pair of shears with cutting blades to do this
Note: There wasn’t anything I trimmed that ruined the “pan” of the Mat - only some high edges that had some unnecessary overlap that cause my map pockets on my doors to bump.
Some here might balk at the idea of trimming mats you pay 75 bucks for, which is understandable. However, the finished product is the best solution I’ve had in ages
Husky Mat 35002 / 35001
Classic Style Laser Cut Fitted Floor Mats | Husky Liners
Classic cars need the ultimate protection. Use laser cut fitted floor mats from Husky Liners that mold to the dimensions of your car, leaving nothing to chance.
View attachment 2556287
View attachment 2556288
View attachment 2556289
View attachment 2556301
Good report on these, the fronts look good...any chance there is a one piece rear floor mat for the 60 that you noticed to match these fronts?
Otherwise the cut to fit mats @Hojack mentioned in post #62 look to be the best fit to a 60/62, which includes the one piece rear, I might give those a shot.
Sucks we can't get proper mats for these wagons, the custom fit Husky Liners in my Tundra are freaking awesome. Best purchase ever!!
husky sells a one piece floor but the one I have is already excellent
One key difference between the lloyds mats and these is the trans tunnel lip, If you live anywhere with snow or rain when you rest your foot on the gas pedal it leans on the vinyl square on the tunnel - causing the water to run down it onto the floor
The high lip on these prevents that, and the material is thin enough to where it’s not annoying or in the way
Does the Husky one piece rear match the fronts you showed?
The rear I have is non husky - it’s a generously large Goodyear from Walmart that fits great
didn’t feel the need to spend all the money on a full set if it could be done for less
Last edited:
