VI: Buy/Sell/Trade, In Search Of (1 Viewer)

[Alp22]

WANTED! Comox valley area.

3b engine mount/s for a 40
3b exhaust manifold gasket
3b push rod cover gasket
3b rear main seal

Thought I'd throw it out here before ordering online. If anyone has any of these kicking around, let me know. Thanks!

 

[cruisedeisel]

You seem to have been through a few bj60's. Maybe you should have saved some parts for the future? Cummings is Burton's last name. What exactly are you looking for for electrical parts? Lamenting on here about how scarce cruiser parts are now here on the island is the fault of members of members in this club. Maybe you should think about why it is easier to find stuff for our trucks in Texas than it is here. I have quite a lot of various parts for 60's and 40's but I am reluctant to sell them to anyone around here who is just going to build up a truck to sell it to the US. The short term gain that a few have garnered will cost all of us as cruiser heads around here for many years to come. It will get harder and harder in the years to come due to the opportunistic greed of these members.

I have never sold a cruiser. I have killed many and crushed a couple due to life's uncertaintees. I did trade one for my 12 valve. Not a drop of guilt over here.

 

[GTSSportCoupe]

ISO - 12HT FSM with the blue cover. Paper copy. NOT pdf

Have you seen this source? 2H and 12HT Engine Repair Manual [RM012E] - $59.99 : CruiserParts.net, Toyota Landcruiser Parts

Or if you want to get gouged: 1987 Toyota Land Cruiser HJ60 HJ61 HJ75 12H-T Turbo Diesel Service Repair Manual | eBay

 

[seapotato]

Sounds like a job for the printer at work....

 

[cruiserpilot]

Sounds like a job for the printer at work....

I just printed a few pages from a PDF copy. They’re barely good. I think the
quality is reduced at they get reproduced and reduced every time they get passed
on. I’d prefer an original book. I found one in Australia but I had to join PayPal, google
and some other damned thing.
thanks for the links though! Sure certainly appreciate it

 

[GTSSportCoupe]

I just printed a few pages from a PDF copy. They’re barely good. I think the
quality is reduced at they get reproduced and reduced every time they get passed
on. I’d prefer an original book. I found one in Australia but I had to join PayPal, google
and some other damned thing.
thanks for the links though! Sure certainly appreciate it

The Ebay one is genuine original Toyota print from the looks of it. But $$$.

 

[seapotato]

Yeah the PDFs that are from scanned copies kinda suck. I have one for my 12ht, I usually just print the couple pages I need.

The REAL PDFs are nice tho.

I have a real one for my little Celica, searchable, chapter tabs work... actually really nice to use.

 

[GTSSportCoupe]

The REAL PDFs are nice tho.

I have the real pdf manuals for my engine. Definitely a very nice thing to have. In fact I bought the paper ones too, but tend to use the pdfs more because it's so fast to find stuff.

 

[bcsteel]

Did the copy I emailed you not cut it? Email sent

 

[PeeZed]

Taking my 24v alternator to BRAE on Monday based on recommendations here and the fact that when I called they seemed confident they could fix it. The original place I took it wasn't able to source parts so hopefully BRAE is the winning ticket.

 

[GTSSportCoupe]

Taking my 24v alternator to BRAE on Monday based on recommendations here and the fact that when I called they seemed confident they could fix it. The original place I took it wasn't able to source parts so hopefully BRAE is the winning ticket.

I've always been please with their service. Had a number of alternators repaired their before. I think you'll walk away happy.

 

[bikersmurf]

Seen on Facebook, not mine

 

[cruiserpilot]

Seen on Facebook, not mine
View attachment 2286620

Not on FB. Any chance you could get details? Wheel size & BS? What are they off of.
tire size?

 

[bikersmurf]

Not on FB. Any chance you could get details? Wheel size & BS? What are they off of.
tire size?

They seem to be gone now. 31 x 10.5 r 15 if memory serves me correctly. 250$ and it looked like they had their nibs still. At that price they may have been sold before I saw them... just not updated.

Ill look again to be sure

edit. I searched by name... over a week ago he was looking for one to add to his 3 to make a set of 4. None are listed now.

next time I’ll save a link so I can be certain what happened,

 

[cruiserpilot]

Thanks, seems to be the way it goes.

 

[bikersmurf]

Thanks, seems to be the way it goes.

What size are you looking for? PM me a phone number and I can contact you directly if I spot some.

 

[vanislebj60]

ISO 33'' x10.5 or 12.5 R 15. Just need a somewhat decent spare. Also looking for a BJ60 power steering Cap and reservoir or whole pump.

 

[bikersmurf]

ISO 33'' x10.5 or 12.5 R 15. Just need a somewhat decent spare. Also looking for a BJ60 power steering Cap and reservoir or whole pump.

X2

I’m looking for a 33x10.50 R15 for a spare also in case you find a pair. I have a 12.5 currently and would like a 10.5 BFG instead.

 

[seapotato]

Taking my 24v alternator to BRAE on Monday based on recommendations here and the fact that when I called they seemed confident they could fix it. The original place I took it wasn't able to source parts so hopefully BRAE is the winning ticket.

Let us know how it works out, I have my old 24v 12ht alternator that had the same issue as yours if I'm remembering right...and I should probably be prepared for the one in my trucks inevitable bed s***ting.

 

[PeeZed]

Let us know how it works out, I have my old 24v 12ht alternator that had the same issue as yours if I'm remembering right...and I should probably be prepared for the one in my trucks inevitable bed s***ting.

Got a call this afternoon from BRAE. They put my alternator back together and tested it (I brought it to them apart as that's how I got it back from first guy). Works fine apparently. With external regulator they are wondering if it was hooked up incorrectly. I installed a new one a couple months ago and hooked the wires up same as PO. Maybe they ain't right?!? Anyways, I'm bringing the regulator in tomorrow morning so they can wire it directly to alternator so it's stupid simple for me on my end.

I may have wires leftover when I reinstall...the mystery continues.

I'll keep you posted.