Lol you're stupid....how was the my lil pony movie JP
UC chat (3 Viewers)
- Thread starter Trollhole
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Lol you're stupid....how was the my lil pony movie JP
- Thread starter
- #4,162
burn. Good one Chuck.
not
not
They did it just to torture you no other reason at all
Thats Funny as #^ll.--- The same reason I took my cruiser up there--- Oh wait that is my Junk hes asking about!
The owners not very well grounded either!!!
Last edited:
Anyone know of a good realtor who's not a fake, or a liar?? I'm looking around Clemson area.
Call Les Walden and ask for Svenja, it German and the s and v are together and the j sounds out as Y. She was great, showed us a ton of houses even though we weren't sure if we were gonna list out house. Didn't pressure us to try and put our house on the market. And she didn't call us 10000 times a day to ask us if we were gonna buy something.
Thanks. I'm trying to buy and stop wasting cash renting.
I sent her a message, hopefully she can help me like she helped you. Thanks for the recommendation.
No problem Kevin
Its taken me four days of on and off reading to catch up on all of the tom foolery, shenanigan havin' ass-hatery thats been going on. I've been gone too long. So let me get this straight......
Marshall has a Shop.
Steve has a shop.
JP is in the greater Augusta area.
Ghen moved back to Vermont...im guessing? Something about being in Kabul?
Richard moved/got a job in Virginia?
Chuck is.....well chuck but with kids.( just kiddin chuck. I got much love and PBR for ya)
David D is still in Pumpkintown. I still owe you big time SIR! I think we agreed on wild turkey if that's still your choice.
Where is the Cuban? I read a few post and they've only mentioned my Airborne brother. Where art thou Cuban?
3Pits has the restaurant up and going and still is the remaining champ of cruiser parts. ( I still have the shackles on my 62 that i bought at a parts swap. I think that was the same swap that richard burned a hole in his skin trying to cut off leafs for his buck truck)
I dont remember Alan being mentioned. But is Alan still around? That was one hell of a 40 he put together.
I know there are a lot of guys from the Atlanta area that Ive met and wheeled with a few times, Rick and Dan, Good to see our Atlanta brothers still with us. I'll be in your area a good bit. My girlfriend is from Alpharetta so I'll be back and forth until she moves to the upstate.
For those that I don't know or don't know me. My name is Matt J. I've been away from the club since 05-06 and I apologize for that. I've missed out on a lot but at the same time grown up A LOT. Sometimes you need your ass kicked and you have to find your own path and I think I've done that. I hope to be back from all this madness by the end of this year or at the latest, early next year. I'll be home for break from June 21- July 20th. Fingers crossed for a club event in that time frame.
Last time I was home I moved up to Greenville (off of Poinsett hwy) from Anderson. So far I like the area, but i haven't spent any more than 20 days there so we will see how it goes. I enjoy the "mountains" a lot more than flat assed Anderson.
Im looking forward to getting back into the cruiser groove and being a contributing member to the club...not that i contributed much to begin with.
Looking forward to meeting you all soon.
Marshall has a Shop.
Steve has a shop.
JP is in the greater Augusta area.
Ghen moved back to Vermont...im guessing? Something about being in Kabul?
Richard moved/got a job in Virginia?
Chuck is.....well chuck but with kids.( just kiddin chuck. I got much love and PBR for ya)
David D is still in Pumpkintown. I still owe you big time SIR! I think we agreed on wild turkey if that's still your choice.
Where is the Cuban? I read a few post and they've only mentioned my Airborne brother. Where art thou Cuban?
3Pits has the restaurant up and going and still is the remaining champ of cruiser parts. ( I still have the shackles on my 62 that i bought at a parts swap. I think that was the same swap that richard burned a hole in his skin trying to cut off leafs for his buck truck)
I dont remember Alan being mentioned. But is Alan still around? That was one hell of a 40 he put together.
I know there are a lot of guys from the Atlanta area that Ive met and wheeled with a few times, Rick and Dan, Good to see our Atlanta brothers still with us. I'll be in your area a good bit. My girlfriend is from Alpharetta so I'll be back and forth until she moves to the upstate.
For those that I don't know or don't know me. My name is Matt J. I've been away from the club since 05-06 and I apologize for that. I've missed out on a lot but at the same time grown up A LOT. Sometimes you need your ass kicked and you have to find your own path and I think I've done that. I hope to be back from all this madness by the end of this year or at the latest, early next year. I'll be home for break from June 21- July 20th. Fingers crossed for a club event in that time frame.
Last time I was home I moved up to Greenville (off of Poinsett hwy) from Anderson. So far I like the area, but i haven't spent any more than 20 days there so we will see how it goes. I enjoy the "mountains" a lot more than flat assed Anderson.
Im looking forward to getting back into the cruiser groove and being a contributing member to the club...not that i contributed much to begin with.
Looking forward to meeting you all soon.
Hey Matt. Welcome back. Last time you were here, Cullowhee was still open too. Times have indeed changed. We're back to regular monthly meetings too, though we blew past the May meeting since everyone is scrambling to get ready for GSMTR. So if you can swing it, the next one will be June 1st, location to be announced but somewhere in the G'ville area most likely.
Tellico was still open, also
Since you've been gone, I joined, was secretary, VP and Pres.
While I was Sec, the whee was closed.
While I was VP, Tellico was closed.
While I was Pres. GSMTR was a non-wheeling event for the first time ever or since.
My bad...
While I was Sec, the whee was closed.
While I was VP, Tellico was closed.
While I was Pres. GSMTR was a non-wheeling event for the first time ever or since.
My bad...
Southeast Overland
Get lost! Go explore!
Now that's a nice little summary.
Hopefully will see you at an event soon.
Hopefully will see you at an event soon.
Did I read correctly that the club has a GO TO powdercoat guy? Is dis true?
Oh and here is a picture of the UZJ100 and F250 I drive over here.
The 100 is a 5speed and up-armored with custom dents, scratches.
The 250 has custom dents,scratches and bullet holes.
Oh and here is a picture of the UZJ100 and F250 I drive over here.
The 100 is a 5speed and up-armored with custom dents, scratches.
The 250 has custom dents,scratches and bullet holes.
ClemsonCruiser
Supporting Vendor
Did I read correctly that the club has a GO TO powdercoat guy? Is dis true?
Oh and here is a picture of the UZJ100 and F250 I drive over here.
The 100 is a 5speed and up-armored with custom dents, scratches.
The 250 has custom dents,scratches and bullet holes.
That Hundy looks Badass
I don't know about a local to G'ville guy, but ACC Toyota has their own in-house operation called Smoking Gun Custom Powder coating. www.facebook.com/SGPowder
Southeast Overland
Get lost! Go explore!
Go to Smoking Gun (ACC) for all of your powder needs. 
Go to Smoking Gun (ACC) for all of your powder needs.
2X on that , they did a wonderful job on the beast's tranny transfer case looks really nice now! Looking forward to meeting you Matt.
- Thread starter
- #4,180
x2222
