Transmission to Transfer Case Bypass Hose (2 Viewers)

[oldfj40]

Sent PM

 

[shipmag]

Do we blame in on pandemic or Russia’s war on Ukraine? Probably latter as parts come from Europe. The prices went up ten percent. The 12.75” hose is now $76 and the 17.5” hose is $78. At least they are still a available I hope. Vendor confirmed order so Im guessing he has the parts. But today he told me the price increase. For all servicemen thanks for your sacrifice!!

 

[shipmag]

I have received the new batch of hoses. I have ten each in 12.75 and 17.5.

 

[open country]

Just placed my order - thanks Shipmag

 

[open country]

Just installed, thanks to @shipmag for a great order and shipping process.

I have an ‘83 FJ60 and the 12.75” (shorter) hose was perfect length. Enough to thread and seal correctly, but also stay tight to the case. I believe 1985 and later 60’s need the longer hose (someone can check me here).

 

[Keith Fickling]

pm sent. I need a 17.5 for my 85 BJ.

 

[shipmag]

Do you need a shift plate? Ive got 20 different drive train configurations and there is no additional shipping. They are $24 to mudders.

 

[DuckBone]

Great product and communication! Worth the price for the piece of mind knowing that my T-Case isn’t going to run dry.

 

[shipmag]

I will not be able to ship any product july 18 to july 30 2022

 

[mrldcty]

PM sent... need a bypass for my 1/80 40 series.

 

[shipmag]

PM sent... need a bypass for my 1/80 40 series.

Another Happy Customer

I have 3 ea 12.75” left and 9 ea 17.5”. So those mudders needing a special length it shouldnt be too much longer before I need to place an order. If you are wanting a different length please send me a pm so we can start working on your needs without being rushed.

 

[shipmag]

I need to order more hoses. If you need a different size let me know. Now is the tome to order the odd size. My vendor wont make one hose at a time. You have until monday morning to tell me what length you need. I only keep 12.75 and 17.5 in stock. I have one 12.75 left.

 

[shipmag]

If your rig
Is stock u either need a 12.75 or 17.5. If your rig is not stock you may need
A different
Size. I have only made an odd size twice. These two make up 99% of the rigs out there. As others can attest to i have helped them solve their PO problems. The biggest mistake i see is a po puts a pipe plug in the fill hole. What this does is strips the thread at the beginning. The only solution is a 1/2npt male and a m18x1.5 female adapter or a longer bolt. We have found longer banjo bolts on ebay as well as the adapters. When in doubt call me. Ive done over 450 so ive seen different scenarios. 573-382-5406.
Lou

 

[shipmag]

Well bad news and good news. Good news is I have some more hoses on the way. The bad news is the huge price increase. The hoses my cost went up another $5.00 for the 12.75” hoses and the 17.75” hoses. The 12.75” hoses are now $81.00 and the 17.75” hoses are now $83.00. The shipping did not increase. I have found that as we get closer to Christmas shipping will go up. My vendor used Fedex and I use United States Post Office Priority Flat rate because its cheaper. So if you here either announcing increase in shipping let me know. I no longer on a shipping store and dont get news at the farm. So im the last to know when price increases. Until I realize something went up. I should have the hoses Friday September 2, 2022.

 

[shipmag]

The 12.75” hoses are now in stock. Pm for details. Seals and banjo bolts are included.

 

[shipmag]

I still have both sizes 12.75” and 17.5” hoses in stick.

 

[rex in bama]

Product worked great! Great peace of mind to know the transmission and transfer case have this linked up. 12.75 was perfect for my 82 fj40. Thanks, again!

 

[Dustybottoms]

PM sent!

 

[CHILLCAT]

PM sent!

 

[shipmag]

Pm answered