lumbee1
Native American
- Thread starter
- #21
I certainly appreciate all the feedback and I know this is a contentious issue however right now I have air in the pump, my braking performance is quite bad, and my ABS light is on indicating it is not working. When trying to activate the pump all I heard was a soft relay thump and it is very possible that something within the pump is no longer working.
I am going to give it another go with trying to get the pump to work but in the end I want strong consistent brakes and I don't have that with the "factory" braking system. Currently if I had to perform an emergency stop situation on the interstate at 70 mph, I would much rather have no ABS than the soft spongy brakes I have now.
As for modifying the safety features on a vehicle from it's factory configuration, I've installed 35" tires, a lift, removed the EGR, removed the seat belts from the 3rd row, installed 100 series pads, removed the LSPV, replaced the factory bumper with an ARB, and replaced the rear bumper with a 4x4Labs.
I am going to give it another go with trying to get the pump to work but in the end I want strong consistent brakes and I don't have that with the "factory" braking system. Currently if I had to perform an emergency stop situation on the interstate at 70 mph, I would much rather have no ABS than the soft spongy brakes I have now.
As for modifying the safety features on a vehicle from it's factory configuration, I've installed 35" tires, a lift, removed the EGR, removed the seat belts from the 3rd row, installed 100 series pads, removed the LSPV, replaced the factory bumper with an ARB, and replaced the rear bumper with a 4x4Labs.