Yep. Got the doors primed over the weekend. I also am pretty close to starting a thread on the frame off you see. I laid primer down on that too.
nice!!! cant wait to see that thing go together!
The Mule. (1 Viewer)
- Thread starter Hugh Heifer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Status
nice!!! cant wait to see that thing go together!
- Thread starter
- #342
Fxxxing suck balls!
I hooked up a 12 Volt battery tender to the rig about two weeks ago and it indicated I was all good today. I was going to exercise the rig to the local dump for recycle day and it refused to start. No lights and the winch would not even spool so I figured the battery was fried. In my pocket I had a free battery coupon (I had one go bad) so I ran up to Advance and cashed it in on the best one I could get. Brought it home, put it in and nothing. WTF???
Turns out the ground went bad some how where the - attached to the frame. Pretty weird.
Anyways, now I have a new battery in the 40 and an old one on a Battery Tender just in case
I though my GSMTR trip was going t be fxxxed!
I hooked up a 12 Volt battery tender to the rig about two weeks ago and it indicated I was all good today. I was going to exercise the rig to the local dump for recycle day and it refused to start. No lights and the winch would not even spool so I figured the battery was fried. In my pocket I had a free battery coupon (I had one go bad) so I ran up to Advance and cashed it in on the best one I could get. Brought it home, put it in and nothing. WTF???
Turns out the ground went bad some how where the - attached to the frame. Pretty weird.
Anyways, now I have a new battery in the 40 and an old one on a Battery Tender just in case
I though my GSMTR trip was going t be fxxxed!
I encountered that on the BJ a couple years back. It gave me fits because it looked fine. However, when I put a wrench on it; it just broke into pieces.
GSMTR is getting close ... exercise the Mule more so she is very ready.
- Thread starter
- #344
Put the CB in. Was going to post pics but the batteries in the camera died. 
I am having advance issues I think. When I put my foot in it, I get a backfire through the carb.
I am having advance issues I think. When I put my foot in it, I get a backfire through the carb.
- Thread starter
- #345
Here are the CB pics:
I should probably replace that Firestick with a whip so it does not get broken off in the woods.
The hole was already in the dash.
I should probably replace that Firestick with a whip so it does not get broken off in the woods.
The hole was already in the dash.
- Thread starter
- #346
And today I built a trailer hitch. I was drivin' down the road and saw a Mexican with an old trailer hitch perched on top of some scrap metal he was hauling to the scrap yard. I stopped him at a light and bought the hitch for $15.
I cut the ends off and then bodged the rest. Seems sturdy enough for an M416!
I cut the ends off and then bodged the rest. Seems sturdy enough for an M416!
- Thread starter
- #347
Hangs down pretty low but that's OK with me.
- Thread starter
- #348
And I am still working on the doors. They will not be on for GSMTR.
- Thread starter
- #349
[vimeo]24144207[/vimeo]
So what did the 
say when you got home started telling the stories and showing her the truck (plus now you have a video to show her)?
say when you got home started telling the stories and showing her the truck (plus now you have a video to show her)?
Rock crawling? Thats what we call rock bounceing around here. We've created a monster he'll be here next year in a 800 hp buggy! All in all not a bad job for someone on there first trail ride. Now if we could do something about his spotters......
- Thread starter
- #353
She was thrilled I took it out and used it for the reasons I bought itSo what did the
Se\he was all about it and really happy I had fun.
well done man, good to see it running in the woods!
- Thread starter
- #355
I am still waiting for Howard's girl, Summer, to get me pics of the flop.
- Thread starter
- #356
I did this today...
Added a pre-filter to the Weber. It is a ShopVac filter I cut down.
It was hard work.
Sent from technology I can't control using the IH8MUD app.
Added a pre-filter to the Weber. It is a ShopVac filter I cut down.
It was hard work.
Sent from technology I can't control using the IH8MUD app.
- Thread starter
- #357
So what did the
She still refuses to believe I put it on it's side due to lack of photo evidence.
Neither does anyone else.....
- Thread starter
- #360
You guys will not believe this....
So, Poser and I have been phone and internet friends for a few years now and have shipped a few things back and forth for fun and favors over the years.
Well, as I mentioned at the last meeting, I was able to help Steve out by shipping him an SM420 he got on the forum. Well, I expected to come home to a t-shirt and a check for the shipping after a couple days.
That is not quite what happened. I came home to a couple shirts and a few stickers alright...
And one other thing...
BAM!
That fxxxing Poser is a helluva guy! Thanks Steve!
So, Poser and I have been phone and internet friends for a few years now and have shipped a few things back and forth for fun and favors over the years.
Well, as I mentioned at the last meeting, I was able to help Steve out by shipping him an SM420 he got on the forum. Well, I expected to come home to a t-shirt and a check for the shipping after a couple days.
That is not quite what happened. I came home to a couple shirts and a few stickers alright...
And one other thing...
BAM!
That fxxxing Poser is a helluva guy! Thanks Steve!
- Status
